AquaStar 32PD SERIES Installation Instructions Manual - Page 10

Browse online or download pdf Installation Instructions Manual for Lighting Equipment AquaStar 32PD SERIES. AquaStar 32PD SERIES 20 pages. Channel drain, submerged, suction, single, unblockable outlet instructions

32" PINHOLE ANTI-ENTRAPMENT SUCTION OUTLET COVER AND PROPELLER
MANUFACTURED SUMP - 32PDxxx INSTALLATION
IMPORTANT
• Model: 32PDxxx
• Single or multiple drain use
• At IAPMO (a nationally recognized
testing lab), the Propeller™ Drain
sump and cover was tested with no
additional sump depth
• All AquaStar channel drains are
VGB 2008 compliant
• Plumbing to one or two pumps plus
skimmer equalizer are approved –
DO NOT exceed maximum flow rate
of outlet cover for total system
• One-pipe connection can be any
size and centered along channel
slot in sump
• Any plumbing configuration is
approved but do not exceed
maximum flow rate
• IMPORTANT: To be considered
unblockable, the Propeller™ drain
sump must be permanently and
securely affixed to become an
integral part of the pool floor using
epoxy around the entire edge and
all of the enclosed plastic anchors or
optional brass anchors.
APPLY TWO-PART EPOXY TO UNDERSIDE OF
UNBLOCKABLE SUMP
10
EPOXY OR SILICONE
SHOTCRETE/GUNITE
The sump must be permanently and securely affixed to the pool floor using epoxy under the sump and
around the entire edge and all of the enclosed plastic anchors or optional brass anchors. Once this is
completed, the sump becomes a permanent part of the pool structure, creating an unblockable drain.
The drain cover is then affixed to the sump using the designated screws.
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
STEP 1
SHOTCRETE/GUNITE
SHOTCRETE/GUNITE
877.768.2717 fax 877.276.POOL Outside the U.S.: +1.805.620.5060 fax +1.949.336.1940
fig. 1
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
TWO-PART EPOXY
GRAVEL
SINGLE PIPE CONNECTION CAN BE
ANY SIZE AND CENTERED ALONG
CHANNEL SLOT.
fig. 2
CENTER UNBLOCKABLE SUMP CHANNEL SLOT OVER PIPE
GRAVEL
fig. 3
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
STEP 2
INSTALL SCREW ANCHORS (PLASTIC OR BRASS)
GRAVEL
PINHOLE ANTI-ENTRAPMENT
SUCTION OUTLET COVER
UNBLOCKABLE SUMP
PLASTER
USE 1/4" MASONRY DRILL BIT AND INCLUDED
PLASTIC ANCHORS OR 5/16" DRILL BIT AND
OPTIONAL BIK4 BRASS ANCHORS
USE SCREWHOLES OF UNBLOCKABLE SUMP
TO POSITION DRILL
UNBLOCKABLE SUMP
PLASTER
PLASTER