Diamond Audio Technology D61500.1 Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Car Amplifier Diamond Audio Technology D61500.1. Diamond Audio Technology D61500.1 12 pages. D6 series reference amplifiers

Print Page

Diamond Audio Technology D61500.1 Owner's Manual

D6 5.2

Highpass On/Off

Pushing this button "IN" engages the Highpass filter. Pushing this button "OUT" will

bypass the filter. There is one of these switches for each of the front, rear and center

channels.

Slave Select

It is possible to completely run your D5 5.1 off of only one set or input RCA's. The rear,

center, and sub channels can all be slaved of the front channels inputs. Simply push the

appropriate button "IN" to slave that channel to those inputs. You can also slave just the

center and sub channels if you have a four channel input.

Subsonic On/Off

Pushing this button "IN" engages the sub-sonic filter on the sub channels. Pushing this

button "OUT" will bypass the filter.

Subsonic Freq.

Turning this control sets the sub-sonic filter point from 17 Hz (fully counterclockwise) to

80 Hz (fully clockwise).

Lowpass On/Off

Pushing this button "IN" engages the lowpass filter on the sub channels. Pushing this

button "OUT" will bypass the filter.

Lowpass Freq.

Turning this control sets the lowpass crossover point from 60 Hz (fully counterclockwise)

to 250 Hz (fully clockwise).

Sub Channel Inversion

Pushing this button "IN" inverts the phase of the sub channels by 180 degrees. Pushing

this button "OUT" keeps the sub channels in phase.

D6 5.2

Crossover Freq. Diagrams

Subsonic

Lowpass