Diamond Audio Technology D161.5i Installation Manual - Page 5

Browse online or download pdf Installation Manual for Speakers Diamond Audio Technology D161.5i. Diamond Audio Technology D161.5i 9 pages. D1 series

Print Page

Mounting Cup

(align tab and slot)

Clamp Ring

Tweeter

Tweeter Mounting

Screw

When flush or surface mounting tweeters, make sure the

desired location can accommodate the hole size and depth

required. Mount the cup using provided hardware (flush mount

illustration shown on right.) Mount surface cup at desired angle with

provided screws in tweeter mounting kit. Snake speaker wires through tweeter

cup, connect tweeter to wires, and snap tweeter into cup by aligning the notches.

Be careful not to push on the center of the tweeter grill.

Crossover Programming

Each D1 component set comes with a pair of model specific programmable crossovers. Under the cover

there is a jumper marked "TWT REFERENCE" or "- 2dB". Tweeter attenuation can be achieved by moving

the jumper to the appropriate position. The REFERENCE position has no attenuation effect on the tweeter.