AquaSure FORTITUDE COMPACT Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Water Filtration Systems AquaSure FORTITUDE COMPACT. AquaSure FORTITUDE COMPACT 16 pages. Multi-purpose under sink water filter system

Print Page

Step 2:

Connect the water filter system

Caution! open the faucet to the cold water side to test if the water is shut off.

If the water is not shut off, you may have shut off the hot water valve instead,

or your water valve is defective. If your water valve is defective, you will need

to shut the main water line off before proceeding with the installation.

1. Shut off the cold water valve

2. Disconnect the existing cold water line from the cold water valve.

(Some water may leak, use a dry microfiber cloth to wipe off

excessive water.)

3. Disconnect the existing cold water line from the faucet connection.

4. Connect the inlet hose with the Female NPT connection to the Cold

Water Valve.

Important! If your cold water connection is 1/2" Please installed the included

3/8" to 1/2" stainless steel adapter onto the cold water valve and the faucet

connection first. Apply Teflon tape where neccessary.

5. Connect the outlet hose with the Male NPT connection to the

Faucet connection.

6. Connect the quick connection side of the inlet hose to the system

head that shows in.

7. Connect the quick connection side out the outlet hose to the system

head that shows out.

8. Locate the system head in and out port

9. Connect the inlet hose with the female NPT side to the cold water

valve.

10. Connect the outlet hose with the male NPT side to the faucet

connection.

Outlet Hose

Fig. 1

Inlet Hose