Aquatec Aquapro AP200LV Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Water Pump Aquatec Aquapro AP200LV. Aquatec Aquapro AP200LV 2 pages. Low voltage waterfeature pumps

Print Page
Congratulations on your purchase of this product by AQUAPRO,
the answers for your watergarden made easy!
VOLTS (V)
POWER (W)*
MAXIMUM FLOW (L/H)
MAXIMUM HEAD HEIGHT (m)
RECOMMENDED OPERATING HEIGHT (m)
OUTLET Ø (mm)
* Subject to variation according to load. NB: AC Adaptors are subject to induced power loss.
DESCRIPTION AND FEATURES
Your AQUAPRO pump has been
manufactured with advanced technology
to provide you with the best quality pump
for aquariums, fountains, ponds and
hydroponics.
The AQUAPRO pump has a single moving
part, an impellor set, therefore enabling
easy cleaning and maintenance.
The motor unit and electrical components
are encapsulated in epoxy, ensuring safe
and simple operation with the motor not
requiring lubrication.
AQUAPRO pumps that have plastic encased
impellor parts and ceramic shafts may be
used in salt water.
The pump motor is a safe low 12 volts and
is supplied with an AC transformer.
AQP_LV_Waterfeature_Instructions.indd 2
AP200LV
AP550LV
AP750LV
AP1350LV
12
12
12
12
5
8
18
48
200
550
750
1350
0.60
0.95
1.50
2.00
0.25
0.60
1.00
1.50
12
12
12
12|16|19
MAINTENANCE
Disconnect the power cord from the power
unit before performing maintenance. Never
lift pump by power cord.
The motor unit of the pump is encapsulated
with epoxy, therefore there is no need for
lubrication of the motor.
The only serviceable item is the impellor
set, no other maintenance is required.
The power cord can not be replaced. If
the cord is damaged, the pump must be
discarded.
LOW VOLTRAGE WATERFEATURE PUMPS
IMPELLOR MAINTENANCE
The complete impellor set is a wearing
consumable part. Regular inspections,
cleaning and maintenance of impellor is
necessary to ensure longer impellor life.
If the impellor set becomes worn or
damaged it should be replaced (available
from your local dealer). failure to do so may
cause serious damage to the pump.
1. Disconnect the power cord before
performing maintenance. Remove front
cage.
2. Remove the impellor cover by turning
anti-clockwise and pulling out.
3. Gently remove the impellor and shaft.
4. Clean the impellor, checking for any signs
of wear or damage.
1
FRONT COVER
2
IMPELLOR COVER
3
IMPELLOR
4
HOSE CONNECTOR
5
MOTOR BODY
*Includes AC Adaptor for indoor use only
1
2
Exploded view of pump
(AP550LV image shown for illustration purposes only)
INSTRUCTION MANUAL
5. Reinstall the shaft then, carefully slide
the impellor onto the shaft. (Take care
not to pinch your fingers).
6. Replace the impellor cover making sure
the shaft is located properly on the
impellor cover.
7 . Replace the front cage.
8. Re-attach outlet, submerse in water and
turn on.
4
3
5
7/10/13 2:03 PM