Panasonic AW-HS50 Series Manual - Page 19

Browse online or download pdf Manual for Digital Camera Panasonic AW-HS50 Series. Panasonic AW-HS50 Series 20 pages. Combining pinp
Also for Panasonic AW-HS50 Series: Brochure & Specs (4 pages), Manual (4 pages), Manual (2 pages), Quick Start Manual (4 pages), Quick Start Manual (6 pages)

Print Page

AW-HS50

DC 12 V ±10 % (AC adapter provided), 2.0 A

0 °C to 40°C (32 °F to 104 °F)

10 % to 90 % (no condensation)

210 mm x 67 mm x 177 mm

(8-1/4 inches x 2-5/8 inches x 6-15/16 inches) (excluding protrusions)

Approx. 1.4 kg (3.1 lb) (without options)

HD:

1080/59.94i, 1080/50i, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p

SD:

480/59.94i, 576/50i

Y:C

4:2:2, 10 bit (8 bit for FMEM)/ RGB 4:4:4, 8 bit

1ME

SDI:

4 lines, BNC x 4

HD (SMPTE292M)/SD (SMPTE259M) standard

0.8 V [p-p] ±10 % (75 Ω)

DVI-D:

1 signal line, DVI-D x 1 (Analog input signals are not supported)

SDI:

2 lines, BNC x 3 (2 output distribution for OUT1)

HD (SMPTE292M)/SD (SMPTE259M) standard

0.8 V [p-p] ±10 % (75 Ω)

DVI-D:

1 signal line, DVI-D x 1 (Analog output signals are not supported.)

—

D-sub 15 pin x 1, GPI INPUT x 5 channels (photocoupler sensing),

GPI OUTPUT x 7 channels (open collector output)

RJ45, 10 BASE-T/100 BASE-TX

—

CD-ROM (Operating instructions / Image transmission software), AC adapter

Wipe x 13

Cut, Mix, Wipe

—

Linear key, Luminance key, Chroma key*

Mix

—

Mix

AUX BUS1

SDI-IN 1 to 4, DVI-IN (always-on)

SDI-IN1 to 4, DVI-IN

SDI-IN3, 4

—

SDI-IN 1 to 4

1 system*

, Labels, Tally indication, Split-screen (8 Patterns: 4, 5a/5b, 6a/6b, 9 and

10a/10b sections)

OSD [Single Screen Display: SDI-OUT 2,DVI-OUT (unshown on SDI-OUT 1)],

Chroma key sample marker, Audio Level Meter: SDI embedded audio (group1/ 1 ch, 2 ch)

2 channels *

(The data for the images stored in the frame memories can be retained

even when the power is turned off by saving it in the flash memory area which is

incorporated inside the unit.)

—

PinP Preset, Effect dissolve function

*7: May store and recall up to 10 presets (per camera) with current Panasonic pan-tilt systems. *8: May also be used for DSK applications by changing the key layer. *9: Plans call for supporting this

function in the future. *10: OSD, MV frames, Labels, Tally indications, Audio Level Meters, and Camera setting information are not shown on SDI-OUT 1. *11: OSD, MV frames, Labels, Tally indications,

Audio Level Meters, and Camera setting information for MultiViewer Display are not stored in the Frame Memory.

AG-HMX100

AC 100 V to 240 V, 50 Hz/60 Hz, 60 W

5 °C to 40 °C (41 °F to 104 °F)

10 % to 80 % (no condensation)

424 mm x 197 mm x 400 mm

(16-3/4 inches x 7-3/4 inches x 15-3/4 inches) (excluding protrusions)

Approx. 7.9 kg (17.4 lbs) (without options)

HD:

1080/23.98PsF (for 3D only), 1080/59.94i, 1080/50i, 720/59.94p, 720/50p

SD:

480/59.94i, 576/50i

*Mixed operation of different video formats is not possible.

Y:P

:Key 4:2:2:4, 12 bit (Internal process)

1ME

VIDEO:

2 lines, BNC x 2, Analog Composite, 1.0 V[p-p] (75 Ω)

SDI:

4 lines, BNC x 4

HD (SMPTE292M/296M/299M) /SD (SMPTE259M-C/272M-A, ITU-R. BT.656-4) standard

HDMI:

2 signal lines, HDMI x 2 (Type A connector), incompatible with HDCP Link and VIERA Link

DVI-I:

TMDS single link (incompatible with HDCP), compatible with digital/analog RGB

SDI:

4 lines, BNC x 4 (PGM/PVW/AUX/MULTIVIEW x each)

HD (SMPTE292M/296M/299M) /SD (SMPTE259M-C/272M-A, ITU-R. BT.656-4) standard

DVI-D:

2 lines, DVI-D x 2 (PGM/MULTIVIEW x each)

TMDS single link (not compatible with HDCP)

External reference (G/L) input:

BNC x 2 (with loop-through), 1.0 V [p-p] (75 Ω), Analog composite (NTSC/PAL)

Advanced reference (ADV-REF) output:

BNC x 1, 75 Ω, Analog composite

Sync: 0.286 V [p-p] (NTSC)/0.3 V [p-p] (PAL)

Burst: 0.286 V [p-p] (NTSC)/0.3 V [p-p] (PAL)

AUDIO input:

XLR: 4 lines (L and R), +4/0/–3 dBm switchable, balanced, 600 Ω

SDI (embedded audio): 4 lines, HD (SMPTE292M/296M/299M)/SD (SMPTE259M-C/272M-A, ITU-R BT.656-4) standard

HDMI (embedded audio): 2 lines, Type A connector (not compatible with HDCP)

AUX input:

Pin jack: 1 line (L and R),–10 dBV, High impedance, unbalanced

MIC input:

M6 x 1 line, –60 dBV, 2 kΩ, monaural, unbalanced

AUDIO output: PGM: XLR: 1 line (L and R), +4/0/–3 dBm switchable, Low impedance, balanced

Pin jack: 1 line (L and R), –10 dBV, Low impedance, unbalanced

PGM/PVW/AUX OUT: SDI (Embedded Audio) x 1,

HD (SMPTE292M/296M/299M)/SD (SMPTE259M-C/272M-A, ITU-R BT.656-4) standard

PHONES output: M6 x 1, 8 Ω, stereo, unbalanced, –∞ dBu to –20 dBu

—

D-sub 9 pin x 1, RS-232C

TALLY output:

D-sub 9 pin x 1, 8 Cross point, Open-collector, Maximum current: Less than 50 mA,

Maximum Voltage: 35 VDC

GPI:

BNC x 1, Make-Contact

—

CD-ROM (Operating instructions), Power code (3 core cable)

Wipe (BASIC1+2) x 37, Wipe (+MULTI) x 16, Wipe (BLIND) x 23, Wipe (MATRIX) x 7,

Squeeze (COMP+SINGLE) x 13, 2ch Squeeze (COMP+BOTH) x 8, Slide x 8

Cut, Mix, Wipe (including DVE)

Image effect: PGM/A, PST/B BUS Effect: Mosaic, Defocus, Mono, Time effects, Decay, Paint, Nega, Mirror

Linear key, Luminance key, Chroma key, Full key

Cut, Mix, Wipe (including DVE)

Wipe x 6

Luminance key

Mix

—

SDI-IN 1 to 4, DVI-I IN, HDMI 1 to 2/Composite video 1 to 2

—

Every A/B bus

1 system

Labels, Tally indication, Split-screen (the screen split into 10a only)

OSD (several MULTI outputs), WFM, Audio level meter, Embedded audio(SDI, HDMI)

1 systems: still images and movie clips

—

Event memory (100 patterns), Key learning (20 patterns)

(As of April, 2012)