Panasonic BM-ET300AE Operating Instructions Manual - Page 21

Browse online or download pdf Operating Instructions Manual for Digital Camera Panasonic BM-ET300AE. Panasonic BM-ET300AE 35 pages. Iris camera

Print Page

OPERATING PROCEDURES (INSTRUCTIONS FOR IRIS CAMERA USERS)

This section explains how to use the iris camera, register the iris data in the iris server, and recognize yourself with a recogni-

tion camera in the following order.

This is a fundamental operating procedure. Please read here before enrollment and recognition to facilitate the operating pro-

cedures.

• How to carry out enrollment

For iris recognition, you need to make the iris camera capture your iris image and enroll your iris data in the iris server. This

procedure explains how to enroll the iris data in the iris server using the iris camera. Follow the direction of system administra-

tors or operators when you carry out iris data enrollment.

• How to carry out recognition

This procedure explains how to recognize yourself with the iris camera after enrollment.

• How to recognize yourself with the iris camera and a card reader

This procedure explains how to recognize yourself with the iris camera and a card reader after enrollment.

■ How to Position Your Eyes in the Mirror

This iris camera captures the iris data of both eyes at one time. If the eyes are not positioned within the capturing range, enroll-

ment/recognition will be invalid. Before enrollment/recognition, you (the user) should stand in front of the camera as follows

and adjust your eye position. Even when you carry out enrollment/recognition while sitting, you should adjust your eye position

in the same way.

Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the upside limit, get on a

pedestal, etc.

1. Stand where you can see the iris camera

from the front side.

Stand where you can hold the tilt handles with your

arms bent moderately. If you are standing within the

recognition range, an ellipse symbol will appear at the

centre of the mirror.

• The recognition range is within approx. 30 cm to

40 cm {0.98 ft. to 1.32 ft.} away from the iris cam-

era.

• The recognition area differs depending on users.

However, the approximate recognition area is

where you can stand holding the tilt handles with

your arms bent moderately.

35 °

15 °