Panasonic BMET500 - CAMERA HEAD UNIT Operating Instructions Manual - Page 15

Browse online or download pdf Operating Instructions Manual for Digital Camera Panasonic BMET500 - CAMERA HEAD UNIT. Panasonic BMET500 - CAMERA HEAD UNIT 24 pages. Iris camera

Print Page

ADJUSTMENTS AND MAINTENANCE

I Adjustment

G Adjusting the Buzzer Level

Adjust the buzzer level, which informs you of recognition

results, as follows.

1. Open the cover of the numeric keyboard.

2. Insert a Phillips precision screwdriver into the buzzer-

level adjustment hole.

3. Turn the screwdriver to the right or left to adjust the

buzzer level.

To the right: The volume will go up.

To the left: The volume will go down.

CANCEL

ENTER

Volume down

I Maintenance

G Replacing the Front Panel

When the supplied front panel has been damaged, you can

replace it to a new one.

1. Remove the numeric keyboard. (Refer to p.12.)

2. Remove the front panel, and then replace it to a new

one.

You can take the panel away by sliding down.

During the replacement, wear gloves on your hand to

keep the new panel clean.

Make sure the panel's

correct side.

Buzzer-level

adjustment hole

Volume up

Bottom

3. When finished, connect the control cable to the numeric

keyboard.

G Cleaning the Inside of the Camera Unit

There are a mirror, proximity sensor, and two cameras

inside the unit. The cameras will be used for capturing a

face and irises. If dust is sticking to the cameras, it may

cause malfunction. Clean the inside of the camera unit as

follows.

1. Remove the numeric keyboard and the front panel.

(Refer to p.12 and this page.)

2. Blow dust away from the mirror, sensor, Camera 1 and

Camera 2 by using a blower, etc.

If dust still sticks after blowing, wipe away the appli-

ances gently with an eyeglass cleaner or a camera-lens

cleaner.

3. After finished, attach the front panel and numeric key-

board to the unit.

Mirror

Camera 1

Sensor

Notes:

• Keep your hands away from the mirror, Camera 1

and Camera 2. If you touch them directly, it may

cause malfunction due to smudges.

• Do not clean the camera unit with a glass-cleaner,

thinner or water. It may cause malfunction.

• Clean the camera unit with delicate care. Force may

damage the appliance, which may cause trouble.

Camera 2