HP 1810-8 Quick Start Manual

Browse online or download pdf Quick Start Manual for Switch HP 1810-8. HP 1810-8 5 pages. 8g switch

HP 1810-8 and 8G Switch Quick Start Guide

For more detailed instructions and information to set up your switch, view or download the Installation and Getting Started

Guide for your switch at www.hp.com/networking/support.

Unpack and check included parts.

Prepare for installation. To avoid personal injury or product damage, follow the "Safety Precautions" on

page 4.

. Power on and verify that Self-Test completes normally. The switch does not have a power switch. It is powered on

by connecting the AC power adapter supplied with your switch, or by a PoE connection to Port 1 (8G Switch only).

Mount the switch. Unplug the AC power from the switch before mounting it.

Table or Desktop Mounting: Attach the four self-

adhesive pads (included in the accessory kit) to the bottom

corners of the switch.

Documentation kit

■

Switch

■

Accessory kit (installation hardware)

■

Inline AC/DC adapter with power cord

■

or wall mount AC/DC adapter

After Self-Test:

Power LED = On

Fault LED = Off