HP 316095-B21 - StorageWorks Edge Switch 2/24 Manual - Page 22

Browse online or download pdf Manual for Switch HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 41 pages. Edge switch release notes
Also for HP 316095-B21 - StorageWorks Edge Switch 2/24: Update Manual (9 pages), Manual (40 pages), Release Note (32 pages), Release Note (27 pages), Manual (26 pages), Release Note (27 pages), Release Note (25 pages), Installation Instructions Manual (24 pages), Release Note (23 pages), Release Note (23 pages), Release Note (22 pages), Release Note (23 pages), Release Note (19 pages), Release Note (19 pages), Release Note (18 pages), Instructions Manual (17 pages), Release Note (17 pages), Upgrade Instructions (16 pages), Instructions Manual (16 pages), Installation Instructions Manual (16 pages), Release Note (16 pages), Release Note (17 pages), Release Note (17 pages), Release Note (11 pages)

Print Page

Glossary

hub port

H_Port. In arbitrated loop devices, a port that uses arbitrated loop protocols. The physical

interface that attaches to a loop device, either an end device or another loop interconnect device

(hub).

IML

See

initial machine

inband management

Management of the director or switch through a Fibre Channel connection to a port card. See

also

out-of-band

management.

industry standard architecture

ISA. Bus architecture designed for personal computers (PCs) that use an Intel 80386, 80486, or

Pentium microprocessor. ISA buses are 32 bits wide and support multiprocessing.

information message

Software message that indicates to a user that a function is performing normally or has

completed normally. See also

initial machine load

(IML) — Hardware reset for all installed CTP cards on the director. It does not affect other

hardware. It is initiated by pushing the white button on a director's CTP card.

initial program load

(IPL) — Process of initializing the device and causing the operating system to start. Initiated

through a menu in the Element Manager, this option performs a hardware reset on the active

CTP only.

initial program load configuration

(IPL configuration) — In S/390 mode, information containing default configurations stored in a

director or switch's nonvolatile memory. The director or switch loads the file for operation

when powered on.

input/output configuration

The collection of channel paths, control units, and I/O devices that attaches to the S/390 or

zSeries processor.

input/output configuration program

A program that defines all available I/O devices and channel paths to an IBM S/390 or zSeries

processor system. Replaced by the Hardware Configuration Definition Program starting with

MVS/ESA Version 4.0.

Institute of Electrical and Electronics Engineers

IEEE. An organization of engineers and technical professionals that promotes the development

and application of electronic technology and allied sciences.

load.

error message

and

warning

message.

Directors and Edge Switches Glossary