HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note - Page 12

Browse online or download pdf Release Note for Switch HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 19 pages. Edge switch release notes
Also for HP 316095-B21 - StorageWorks Edge Switch 2/24: Update Manual (9 pages), Manual (41 pages), Manual (40 pages), Release Note (32 pages), Release Note (27 pages), Manual (26 pages), Release Note (27 pages), Release Note (25 pages), Installation Instructions Manual (24 pages), Release Note (23 pages), Release Note (23 pages), Release Note (22 pages), Release Note (23 pages), Release Note (19 pages), Release Note (18 pages), Instructions Manual (17 pages), Release Note (17 pages), Upgrade Instructions (16 pages), Instructions Manual (16 pages), Installation Instructions Manual (16 pages), Release Note (16 pages), Release Note (17 pages), Release Note (17 pages), Release Note (11 pages)

Print Page

Important Information

Note:

version 04.01.00.

Downgrading directly to a version prior to 02.00.00 from version 04.YY.ZZ is not

allowed. To downgrade to a version before 02.00.00, you must first downgrade to

version 02.YY.ZZ.

Firmware downgrades should not be performed using EWS and Microsoft®

Internet Explorer version 5.00.3315.1000x. If this operation is performed, the

download operation may not complete and may eventually time-out leaving the

switch with the previous version of firmware.

HAFM Upgrade Required for Firmware Version 05.01.00-24

If you are using the HAFM server to manage the Director 2/140, Director 2/64,

Edge Switch 2/32, Edge Switch 2/24, and/or Edge Switch 2/16, and they are

running firmware version 05.01.00-24, you need to upgrade HAFM to version

07.01.00-09 (minimum). For more information on upgrading software versions,

refer to the HP StorageWorks HA-Fabric Manager User Guide. The features of

this software version are detailed in the accompanying manuals listed in section

"Other Edge Switch

Open Trunking Feature is Not Available in Current Release

The Open Trunking feature is not available in Firmware Version 05.01.00-24.

Open Trunking feature will be available in a future release.

Zoning is Disabled by Default

The default zone on the Edge Switch 2/24 and the Edge Switch 2/32 is disabled by

default. Zoning must be configured in order for any devices connected to the edge

switches to communicate.

The Director 2/140 and Edge Switch 2/24 cannot be downgraded below

Documentation".

Edge Switch Release Notes