HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note - Page 13

Browse online or download pdf Release Note for Switch HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 pages. Edge switch release notes
Also for HP 316095-B21 - StorageWorks Edge Switch 2/24: Update Manual (9 pages), Manual (41 pages), Manual (40 pages), Release Note (32 pages), Release Note (27 pages), Manual (26 pages), Release Note (27 pages), Release Note (25 pages), Installation Instructions Manual (24 pages), Release Note (23 pages), Release Note (23 pages), Release Note (22 pages), Release Note (23 pages), Release Note (19 pages), Release Note (19 pages), Release Note (18 pages), Instructions Manual (17 pages), Release Note (17 pages), Upgrade Instructions (16 pages), Instructions Manual (16 pages), Installation Instructions Manual (16 pages), Release Note (16 pages), Release Note (17 pages), Release Note (11 pages)

Print Page

HAFM software is contained on the HP StorageWorks ha-fabric manager documentation and

software CD (Part Number 516-000024-720).

•

These minimum versions of HAFM allow you to manage Directors or Edge Switches running

ﬁrmware 09.06.02. However, to use all the new features and enhancements, upgrade HAFM to

08.09.01, which can only be run on the HAFM Appliance. An upgrade kit to HAFM 08.09.01 is

available (Part Number A7490A) for owners of a licensed version of HAFM. This HAFM upgrade is

also available on the HP website http://h18006.www1.hp.com/storage/networking/index.html.

Select Retired Products and navigate to your switch model, and then to Download drivers and

software.

As an alternative, you can perform the ﬁrmware upgrade directly to the Director or Edge Switch

using the switch's HAFM Basic.

Contact your local HP technical resource if you need to obtain a new HAFM version or to conﬁrm

compatibility with devices in your SAN before upgrading to this ﬁrmware.

For more information on upgrading software versions, see the HP StorageWorks HA-Fabric Manager

user guide.

Important information

This section lists information that you should consider before using Directors or Edge Switches running

ﬁrmware 09.06.02.

Default zone is disabled by default

The default zone on the Director and Edge Switches is disabled by default. Zoning must be conﬁgured in

order for devices connected to the Director or Edge Switch to communicate.

Some IP addresses must be avoided

If you use HAFM to manage Edge Switches and Directors, do not use IP addresses in the range

192.168.0.0 through 192.168.0.255.

This subnet is used internally by the HAFM Appliance. Using an IP address in this range causes the Call

Home feature to function incorrectly.

Using HAFM Basic

HAFM Basic requires using Microsoft Internet Explorer version 6 or Netscape version 7 in order to

operate correctly.

Zoning limits

Table 6

lists the supported zoning limits for the Edge Switches and Directors.

Director and Edge Switch release notes