HP 371302-B21 - 1x4 USB/PS2 KVM Switch User Manual - Page 12
Browse online or download pdf User Manual for Switch HP 371302-B21 - 1x4 USB/PS2 KVM Switch. HP 371302-B21 - 1x4 USB/PS2 KVM Switch 48 pages. 1x4 usb/ps2 kvm switch
Print Page
Front Panel
Figure 1-1: Front panel
Item
1
2
3
HP 1x4 USB/PS2 KVM Switch User Guide
Description
Function
Port
Press a switch for longer than 2 seconds to bring the KVM focus, USB
selection
peripherals, and audio focus to the computer attached to the
switches
corresponding port.
Press a switch for less than 2 seconds to bring only the KVM focus to
the computer attached to the corresponding port.
Press switches 1 and 2 simultaneously for 2 seconds to start Auto
Scan mode. For more information on Auto Scan mode, refer to "Auto
Scanning" in chapter 3 of this guide.
Press switches 3 and 4 simultaneously for 2 seconds to perform a
keyboard and mouse reset.
Port LEDs
The Port LEDs are built into the Port Selection Switches. The upper LEDs
are the KVM Port LEDs. The lower LEDs are the USB LEDs.
KVM Port LEDs
Dim orange—I ndicates that the computer attached to the
corresponding port is currently online
Bright orange—Indicates tha t the computer attached to the
corresponding port is selected for the KVM focus
Flashing orange—Indic ates that the computer attached to the
corresponding port is being accessed under Auto Scan mode
USB LEDs
Dim green—In dicates that there is a USB cable connection to the
computer
Bright green—I ndicates that the computer attached to the
corresponding port has access to the USB peripherals
USB console
Connectors used for attaching a USB keyboard and mouse or the
ports
PS/2-to-USB interface adapter.
Introduction
1-3