HP 371302-B21 - 1x4 USB/PS2 KVM Switch User Manual - Page 23

Browse online or download pdf User Manual for Switch HP 371302-B21 - 1x4 USB/PS2 KVM Switch. HP 371302-B21 - 1x4 USB/PS2 KVM Switch 48 pages. 1x4 usb/ps2 kvm switch

HP 371302-B21 - 1x4 USB/PS2 KVM Switch User Manual

Auto Scanning

The Auto Scan feature automatically cycles the KVM focus through the computer ports at
regular intervals. This feature enables you to monitor the computer activity without having to
switch from port to port manually.
Table 3-3: Auto Scanning
Scroll Lock
Scroll Lock
To exit Auto Scan mode, press the ESC key or the spacebar.

Hotkey Setting Mode

Hotkey Setting Mode (HSM) is used to set up the switch configuration. All operations begin
with invoking HSM.

Invoking HSM

1. Press and hold the Num Lock key.
2. Press the minus key.
NOTE: If the minus key is not released within 0.5 second, hotkey invocation is canceled.
3. Release the Num Lock key.
Ordinary keyboard and mouse functions are suspended, and only hotkey compliant
keystrokes and mouse clicks described in this chapter can be input.
When HSM is active, the Caps Lock and Scroll Lock LEDs flash in succession to indicate
that HSM is in effect. The LEDs stop flashing and revert to normal status upon exiting HSM.
At the conclusion of some hotkey operations, you automatically exit Hotkey mode. With
some operations, you must exit manually. To exit HSM manually, press the Esc key or the
Spacebar.
HP 1x4 USB/PS2 KVM Switch User Guide
Hotkey
Action
A Enter
Starts Auto Scan. The KVM focus cycles from port to port at
5-second intervals.
A n Enter
Starts Auto Scan. The KVM focus cycles from port to port at
n-second intervals, between 1 and 99.
Operation
3-3