HP 5120 SI Series Installation Manual - Page 5

Browse online or download pdf Installation Manual for Switch HP 5120 SI Series. HP 5120 SI Series 48 pages. 5120 si switch series
Also for HP 5120 SI Series: Specification (33 pages)

HP 5120 SI Series Installation Manual

Preparing for installation

The HPE 5120 SI Switch Series includes the models in
Table 1 HPE 5120 SI Switch Series models
Type
Non-PoE
PoE
IMPORTANT:
For regulatory identification purposes, the HPE 5120 8G PoE+ (65W) SI Switch and HPE 5120 8G
PoE+ (180W) SI Switch products are assigned Regulatory Model Numbers (RMN). The Regulatory
Model Numbers for these products are listed below. These regulatory numbers should not be
confused with the marketing names HPE 5120, or product numbers JG310B and JG309B.
Table 2 Regulatory Model Numbers in the HPE 5120 8G SI Switch Series
Product code
JG310B
JG309B

Safety recommendations

To avoid any equipment damage or bodily injury caused by improper use, read the following safety
recommendations before installation. Note that the recommendations do not cover every possible
hazardous condition.
Before cleaning the switch, unplug all power cords. Do not clean the switch with wet cloth or
liquid.
Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
Do not place the switch on an unstable case or desk. The switch might be severely damaged in
case of a fall.
Ensure proper ventilation of the equipment room and keep the air inlet and outlet vents of the
switch free of obstruction.
Make sure the operating voltage is in the required range.
To avoid electrical shocks, do not open the chassis while the switch is operating or when the
switch is just powered off.
When replacing FRUs, wear an ESD wrist strap to avoid damaging the units.
Product
HPE description
code
JE073B
HPE 5120 16G SI Switch
JE074B
HPE 5120 24G SI Switch
JE072B
HPE 5120 48G SI Switch
JG091B
HPE 5120 24G PoE+ (370W) SI Switch
JG310B
HPE 5120 8G PoE+ (65W) SI Switch
JG309B
HPE 5120 8G PoE+ (180W) SI Switch
RMN
BJNGA-AD0007
BJNGA-AD0008
Table
1.
HPE description
HPE 5120 8G PoE+ (65W) SI Switch
HPE 5120 8G PoE+ (180W) SI Switch
1
Alias
5120 16G SI
5120 24G SI
5120 48G SI
5120 24G PoE+ (370W) SI
5120 8G PoE+ (65W) SI
5120 8G PoE+ (180W) SI