HP ProCurve 1600M Reviewer's Manual - Page 8

Browse online or download pdf Reviewer's Manual for Switch HP ProCurve 1600M. HP ProCurve 1600M 27 pages. Redundant power supply
Also for HP ProCurve 1600M: Specification Sheet (12 pages), Read Me First (8 pages), Supplementary Manual (2 pages), Supplementary Manual (2 pages), Installation Manual (28 pages), Installation Manual (36 pages), Installation Manual (28 pages), Quick Setup Manual (2 pages), Quick Setup Manual (4 pages), User Manual (8 pages), Manual Supplement (28 pages), Read Me First (16 pages), Installation And Removal (2 pages), Installation Manual (12 pages), Planning And Implementation Manual (40 pages), Product End-Of-Life Disassembly Instructions (2 pages), Installation Manual (46 pages), Diagnostics Manual (2 pages), Disassembly Instructions (2 pages)

Print Page

HP ProCurve Routing Switch 9308M / 9304M Reviewer's Guide

2.1 Feature Set Summary

The HP ProCurve Routing Switch 9304M and HP ProCurve Routing Switch 9308M are store-and-

forward Layer 3 routing switches that feature:

A non-blocking Layer 3 architecture consisting of shared memory on each card, all

interconnected via the backplane cross point matrix switch fabric. 9308M: 96 Million pps,

9304M: 48 Million pps.

Hardware wire speed routing for IP and IPX. Processor-based 300,000 pps routing for

AppleTalk.

IP Functionality supported:

�

Routing services: RIP (v1, v1 compatible v2, and v2), OSPF (RFC 1583 and RFC 2178

compliant).

�

DNS Resolver - converts names to DNS server addresses

�

UDP Helper - supports packet relay of UDP packets for certain services

IPX RIP/SAP routing supported

AppleTalk Routing Table Maintenance Protocol (RTMP) routing

Multicast support: IGMP, PIM (dense) and DVMRP

Link Aggregation (Port Trunks) – Switch-to-switch and switch-to-server aggregated links allow

scalable bandwidth communication. Can be used in many cases to trunk to non-HP devices.

Compatible with Cisco Fast EtherChannel (PAgP turned off).

Up to (4096) 802.1Q compliant port-based, Layer 2 and Layer 3 VLANs for segmentation of local

LANs

Extensive filtering capabilities based on Layer 2 addresses and Layer 3 routes or addresses. For

IP, Layer 4 port number filtering is supported. AppleTalk zone filtering is available. Filtering

(except AppleTalk) is performed at wire-speed.

Virtual Router Redundancy Protocol (VRRP) – Provides hot standby router services. A second

9300 can be in active stand-by on the network in case of failure of the primary router. VRRP is a

proposed standard of the IETF, RFC 2338.

One year warranty, support services are available for additional years.

Free lifetime software updates (best in the industry)

Free end-user telephone support available worldwide during the warranty period.

Extensive net management capabilities including:

�

Web-based management for anytime, anywhere configuration access

�

HP TopTools for Hubs & Switches (standalone), seamless integration with

HP OpenView/NT

�

Integration into HP OpenView/UX with option HP Hub & Switch Management for

HP OpenView/UX.

�

SNMP/MIB II/RMON support on all ports for monitoring and control

�

Ability to configure a network monitoring port for use with external probes or analyzers

Spanning Tree Protocol (802.1D) support - one instance per VLAN.

Year 2000 compliant

2. Evaluation Features and Benefits

Revision 4.0 – 4/1/1999

Page: 8 of