HP ProCurve 1600M Installation Manual - Page 24

Browse online or download pdf Installation Manual for Switch HP ProCurve 1600M. HP ProCurve 1600M 28 pages. Redundant power supply
Also for HP ProCurve 1600M: Specification Sheet (12 pages), Read Me First (8 pages), Reviewer's Manual (27 pages), Supplementary Manual (2 pages), Supplementary Manual (2 pages), Installation Manual (28 pages), Installation Manual (36 pages), Quick Setup Manual (2 pages), Quick Setup Manual (4 pages), User Manual (8 pages), Manual Supplement (28 pages), Read Me First (16 pages), Installation And Removal (2 pages), Installation Manual (12 pages), Planning And Implementation Manual (40 pages), Product End-Of-Life Disassembly Instructions (2 pages), Installation Manual (46 pages), Diagnostics Manual (2 pages), Disassembly Instructions (2 pages)

Print Page

Mode Conditioning Patch Cord for Gigabit-LX

the multimode cable in the

patch cord must match

the characteristics of

to network

your network cable

multimode

cabling

Computer Crafts

Installing the Patch Cord

As shown in the illustration below, connect the patch cord to the Gigabit LX

Transceiver with the section of single-mode fiber plugged in to the Tx

(transmit) port. Then, connect the other end of the patch cord to your network

cabling patch panel, or directly to the network multimode fiber.

If you connect the patch cord directly to the network cabling, you may need

to install a female-to-female adapter to allow the cables to be connected

together.

Gigabit Stacking Module with

Gigabit-LX Transceiver

Make sure you purchase a patch cord that has SC connectors on the end that

connects to the Gigabit LX Transceiver and has multimode fibers that match

the characteristics of the multimode fiber in your network.

The following Mode Conditioning Patch Cords have been tested and verified

to operate correctly with the HP Gigabit LX Transceiver:

Part Number

• MCP07071-002

• MCP07072-002

• MCP01071-002

• MCP01072-002

These part numbers could change. Contact Computer Crafts through the

world wide web at www.computer-crafts.com. A number of other vendors

provide mode conditioning patch cords including Siecor, Inc. which can be

contacted at www.siecor.com.

Mode Conditioning

Patch Cord

single-mode section plugs into Tx

port on Gigabit LX Transceiver

Connectors

Multimode Section Fiber Type

SC-SC

SC-ST

62.5/125 µm

50/125 µm

62.5/125 µm

50/125 µm