HP ProCurve 1600M User Manual - Page 4

Browse online or download pdf User Manual for Switch HP ProCurve 1600M. HP ProCurve 1600M 8 pages. Redundant power supply
Also for HP ProCurve 1600M: Specification Sheet (12 pages), Read Me First (8 pages), Reviewer's Manual (27 pages), Supplementary Manual (2 pages), Supplementary Manual (2 pages), Installation Manual (28 pages), Installation Manual (36 pages), Installation Manual (28 pages), Quick Setup Manual (2 pages), Quick Setup Manual (4 pages), Manual Supplement (28 pages), Read Me First (16 pages), Installation And Removal (2 pages), Installation Manual (12 pages), Planning And Implementation Manual (40 pages), Product End-Of-Life Disassembly Instructions (2 pages), Installation Manual (46 pages), Diagnostics Manual (2 pages), Disassembly Instructions (2 pages)

Print Page
HP ProCurve 1600M User Manual
Page 6-39; Modified Example Using a Trunked Link with STP and VLANs. The following
illustration more clearly shows the trunked link configured with two tagged VLANs.
Example of Using a Trunked Link with STP and VLANs
Page 6-43; Multicast Filters.
Insert the following after the ''Multicast Filters'' heading: ''Multicast filters are configured
using the Ethernet format for the multicast address.''
In the Note at the bottom of the page, insert the following at the end of the first sentence:
''...(which corresponds to the Ethernet multicast address range of 01005e-000000 through
01005e-7fffff).''
Page 6-44; Protocol Filter Type. In the bulleted list of filtered protocol types, change NetBIOS to
NetBEUI.
4
Problem: STP enabled with
2 separate (non-trunked)
links blocks a VLAN link.
Nodes 1 and 2 cannot
communicate because
STP is blocking the link.
Solution: STP enabled with
1 trunked link.
802.1Q VLAN tagging
allows two or more
VLANs to use the
same link.
Nodes 1 and 2 can
communicate because
STP sees the trunk as a
single link and 802.1Q
(tagged) VLANs enable the
use of one (trunked) link for
both VLANs.