HP ProCurve 2610-48-PWR Specifications - Page 4
Browse online or download pdf Specifications for Switch HP ProCurve 2610-48-PWR. HP ProCurve 2610-48-PWR 10 pages. Procurve switch 2610 series
Print Page
HP ProCurve Switch 2610 Series
Specifications
Ports
Physical characteristics
Dimensions
Weight
Memory and processor
Processor
Mounting
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching capacity
MAC address table size
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Maximum heat dissipation
Voltage
Current
HP ProCurve Switch 2610-48 (J9088A)
48 auto-sensing 10/100 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type
100Base-TX); Media Type: Auto-MDIX;
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE
802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab Type
1000Base-T); Duplex: 10Base-T/100Base-TX:
half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x
4.39 cm) (1U height)
10.75 lb. (4.88 kg), Fully loaded
MIPS @ 300 MHz, 16 MB flash, 128 MB
SDRAM; packet buffer size: 2 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
< 6.2 µs (LIFO)
< 4.4 µs (LIFO)
up to 13.0 million pps
17.6 Gbps
8000 entries
32ºF to 122ºF (0ºC to 50ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 90% @ 149ºF (65ºC), non-condensing
up to 10000 ft. (3 km)
Power: 45 dB, Pressure: 36.2 dB; DIN
45635T.19 per ISO 7779
285 BTU/hr (300.67 kJ/hr)
100-127 / 200-240 VAC
1.3 / 0.8 A
HP ProCurve Switch 2610-24 (J9085A)
24 auto-sensing 10/100 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type
100Base-TX); Media Type: Auto-MDIX;
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE
802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab Type
1000Base-T); Duplex: 10Base-T/100Base-TX:
half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x
4.39 cm) (1U height)
5.5 lb. (2.49 kg), Fully loaded
MIPS @ 300 MHz, 16 MB flash, 128 MB
SDRAM; packet buffer size: 1 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
< 4.1 µs (LIFO)
< 2.9 µs (LIFO)
up to 9.5 million pps
12.8 Gbps
8000 entries
32ºF to 122ºF (0ºC to 50ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 90% @ 149ºF (65ºC), non-condensing
up to 10000 ft. (3 km)
Power: 0 dB, Pressure: 0 dB No Fan
142 BTU/hr (149.81 kJ/hr)
100-127 / 200-240 VAC
0.8 / 0.4 A
HP ProCurve Switch 2610-24-PWR
(J9087A)
24 auto-sensing 10/100 ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type
100Base-TX); Media Type: Auto-MDIX;
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE
802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab Type
1000Base-T); Duplex: 10Base-T/100Base-TX:
half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
12.5(d) x 17.4(w) x 1.73(h) in. (31.75 x 44.2 x
4.39 cm) (1U height)
15.05 lb. (6.83 kg), Fully loaded
MIPS @ 300 MHz, 16 MB flash, 128 MB
SDRAM; packet buffer size: 1 MB
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included);
horizontal surface mounting only
< 4.1 µs (LIFO)
< 2.9 µs (LIFO)
up to 9.5 million pps
12.8 Gbps
8000 entries
32ºF to 122ºF (0ºC to 50ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 90% @ 149ºF (65ºC), non-condensing
up to 10000 ft. (3 km)
Power: 64 dB, Pressure: 57 dB; DIN
45635T.19 per ISO 7779
410 BTU/hr (432.55 kJ/hr), (switch-only
BTU/hr: 410; combined switch + max. PoE
devices at 15.4 W: 2281 BTU/hr )
100-127 / 200-240 VAC
7.0 / 3.5 A
4