HP StorageWorks 1000 - Modular Smart Array Specification - Page 38

Browse online or download pdf Specification for Switch HP StorageWorks 1000 - Modular Smart Array. HP StorageWorks 1000 - Modular Smart Array 49 pages. Power supply, computer
Also for HP StorageWorks 1000 - Modular Smart Array: Network Manual (8 pages), Support List (34 pages), Error Prevention Manual (12 pages), Technical White Paper (12 pages), Firmware Update (9 pages), Overview (20 pages), Installation Manual (2 pages), Support Telephone Numbers (19 pages), Reference Manual (48 pages), Administration Manual (40 pages), Release Note (13 pages), Quick Start Instructions (8 pages), Quick Start Manual (7 pages), Release Note (5 pages), Replacement Instructions (4 pages), White Paper (13 pages), Technology Brief (15 pages), Quickspecs (17 pages), Getting Started Manual (34 pages), Installation (4 pages), Installation Manual (18 pages), Disassembly Instructions Manual (9 pages), Programming Manual (8 pages)

Print Page
HP StorageWorks 1000 - Modular Smart Array Specification
QuickSpecs
Technical Specifications
Input Requirements
(per power supply)
BTU Rating
Power Supply Output
(per power supply)
System Inlet Temperature Operating
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
DA - 14434 North America — Version 9 — October 4, 2013
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Rated Input Power
Maximum
Rated Steady-State Power 350 W (at 100 VAC),
Maximum Peak Power
Non-operating
Operating
Non-operating
Operating
Non-operating
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Idle
L WAd
L pAm
Operating
HP StoreEasy 1000 Storage
25.29 lb (11.47 kg)
100 to 240 VAC
7.1 Amps (at 120VAC) to 3.5 Amps (at 240 VAC)
50 to 60 Hz
486 W
460W - 1773 BTU / hr (at 120 VAC), 1715 (at 240
VAC)
350 W (at 200 VAC)
350 W (at 100 VAC),
350 W (at 200 VAC)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be limited
by the type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
3048 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
4.3 B
26dB-A
Page 38