HP StorageWorks 9100 - Extreme Data Storage System User Manual - Page 23
Browse online or download pdf User Manual for Switch HP StorageWorks 9100 - Extreme Data Storage System. HP StorageWorks 9100 - Extreme Data Storage System 50 pages. Hp storageworks 3gb sas bl switch installation instructions (496788-002, march 2009)
Also for HP StorageWorks 9100 - Extreme Data Storage System: Instructions (4 pages), Installation Instructions (3 pages)
Print Page
The second character indicates the controller signalling the error:
•
1—Controller 1
•
2—Controller 2
The third and fourth characters indicate the specific error on the controller: (Displayed by pressing the up
or down arrow on the seven-segment display.)
Example 1. Error code example
C101 = Controller 1, unsupported configuration
POST codes
At power on, the enclosure goes through a series of tests called Power On Self Tests (POST). As each test
runs, a code is displayed on the seven-segment display indicating the current test being run.
Table 3 POST codes
Description
POST code
SU
Controller firmware has been unpacked and launched.
S1
Port setup is complete.
S2
Pause / Wait for Expander Discovery is complete.
S3
Static Class Construction complete / Valid Stack Range has been set.
S4
PCI express cores have been initialized.
S5
PCI express core 0 link has been activated.
S6
Battery initialization complete.
S7
Memory Pools have been registered.
S8
The Serial Output Buffer initialization is complete.
S9
Product ID and controller ID have been set.
SA
OS Services object construction is complete.
SB
HCS initialization is complete.
SC
Task creation is complete.
9100c Extreme Data Storage System user guide
23