HP StorageWorks Core Switch 2/64 Release Note - Page 3
Browse online or download pdf Release Note for Switch HP StorageWorks Core Switch 2/64. HP StorageWorks Core Switch 2/64 27 pages. Director power cord advisory instruction
Also for HP StorageWorks Core Switch 2/64: Quickspecs (13 pages), Release Note (24 pages), Release Note (20 pages), Release Note (13 pages), Release Note (11 pages), Instruction (1 pages)
Print Page
About this document
These release notes contain late breaking and supplemental information for the Director
2/64 and Director 2/140.
Be sure to read these release notes before installing a Director 2/64 and Director 2/140.
This information is periodically updated and available on the following HP web site:
http://www.hp.com/country/us/eng/prodserv/storage.html.
This section describes the content reflected in this document, including:
• Release notes information
• Intended audience
• Firmware version 07.01.02-4
• Other director documentation
• CD-ROM directory structure
• Supported configurations
• Cable requirements
• Important information
• Known issues
Release notes information
These release notes cover the following major topics:
• HSG80 transparent mode not recommended with controller in SCSI-3 mode
with HP-UX operating systems
• HSG80 transparent mode not recommended with controller in SCSI-3 mode with
• ISL disconnect causes NOS error with the OpenVMS operating systems
• Support for speed Auto-Negotiate
• Ports may accumulate spurious events
• Possible switch reset after power failure or power off sequence
• SNMP issues
Intended audience
This document is intended for customers who purchased the Director 2/64 or Director
2/140.
Firmware version 07.01.02-4
Firmware 07.01.02-4 is the latest (as of this date), firmware released with the
Director 2/64 and Director 2/140. The latest firmware is available on the following HP
web site: http://h18006.www1.hp.com/storage/saninfrastructure.html.
Director release notes
1