HP StorageWorks MSA 2/8 - SAN Switch Quick Reference Manual - Page 7

Browse online or download pdf Quick Reference Manual for Switch HP StorageWorks MSA 2/8 - SAN Switch. HP StorageWorks MSA 2/8 - SAN Switch 8 pages. Hp storageworks fabric os commands v3.1.x/4.1.x quick reference guide (aa-rte6b-te, june 2003)
Also for HP StorageWorks MSA 2/8 - SAN Switch: Update Manual (9 pages), Release Note (10 pages)

Print Page

Command

routeHelp

savecore

secfabricshow

secfcsfailover

sechelp

secmodedisable

secmodeenable

secmodeshow

secnonfcspasswd

secpolicyabort

secpolicyactivate

secpolicyadd

secpolicycreate

secpolicydelete

secpolicydump

secpolicyfcsmove

secpolicyremove

secpolicysave

secpolicyshow

secstatsreset

secstatsshow

sectemppasswdreset

sectemppasswdset

sectransabort

secversionreset

Legend:

v3.1 unique commands

v4.1 unique commands

v3.1 and v4.1 commands

Definition

Display routing help

commands.

Save or remove core files

created by daemons.

Display security-related fabric

information.

Enable a Backup FCS switch

to take over as Primary FCS

switch.

Display information about

security telnet commands.

Disable security mode.

Enable security mode.

Display if security mode is

enabled or disabled.

Set the admin password for

non-FCS switches.

Abort all changes to the

defined database that have

not been saved.

Apply defined policy set to all

switches in the fabric.

Add members to an existing

policy.

Create a new policy.

Delete an existing policy.

Show all members of existing

policies.

Move a member in the FCS

policy.

Remove members from an

existing policy.

Save a defined security policy

to flash memory on all

switches in the fabric.

Show an existing security

policy.

Reset security statistic for a

policy for all policies to zero.

Display security statistic for a

policy or for all policies.

Reset a password on a

remote switch.

Set a temporary password on

a remote switch.

Abort current security

transaction.

Reset the version stamp to

zero.

Command

sensorShow

setdbg

setesdmode

setgbicmode

setsfpmode

setSplbMode

setverbose

sfpShow

slotOff

slotOn

slotpoweroff

slotpoweron

slotShow

snmpMibCapSet

spinFab

spinSilk

sramRetentionTest

snn

statsTest

stopporttest

supportShow

switchBeacon

switchcfgpersistentdisable

switchcfgpersistentenable

switchCfgSpeed

switchCfgTrunk

switchDisable

switchEnable

Legend:

v3.1 unique commands

v4.1 unique commands

v3.1 and v4.1 commands

Page 7

Definition

Display sensor readings.

Set debug level of the

specified module.

Enable or disable ESD mode.

Enable or disable GBIC

mode.

Enable or disable SFP mode.

Enable or disable two-port

loopback.

Set verbose level of the

module to specified level.

Display serial ID SFP

information.

Disable a blade slot.

Enable a blade slot.

Power off a blade unit.

Power on a blade unit.

Display slot status.

View and modify options for

configuring SNMP MIB trap

capability.

Test for Cascaded switch ISL

links.

Run functional test of port

connection at maximum

switch speed.

Run data retention test of the

miscellaneous SRAMs in

ASIC.

Display and set the soft serial

number.

Run a statistics counter

diagnostic test.

Terminate the running

porttest.

Print switch information for

debugging purposes.

Set switch beaconing mode

on or off.

Disable switch persistently.

Enable switch persistently.

Configure all ports of the

switch to a particular speed.

Enable or disable trunking on

all the ports of a switch.

Disable the switch.

Enable the switch.