HP StorageWorks XP10000 - Disk Array System Configuration Manual - Page 14

Browse online or download pdf System Configuration Manual for Switch HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 35 pages. Cache lun xp
Also for HP StorageWorks XP10000 - Disk Array: Release Note (13 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), System Configuration Manual (49 pages), System Configuration Manual (43 pages), System Configuration Manual (42 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages), Configuration Manual (42 pages), User Manual (30 pages)

Print Page

Fibre address

In fabric environments, the port addresses are assigned automatically. In arbitrated

loop environments, set the port addresses by selecting a unique arbitrated loop

physical address (AL-PA) or loop ID for each port. For speciﬁc values, refer to the HP

StorageWorks LUN Conﬁguration and Security Manager XP User Guide applicable

to your array .

Set each array port to FABRIC ON or OFF with connections of POINT-TO-POINT or

FC-AL as shown in the following ﬁgures and table. HP recommends that the individual

Fibre Channel paths from the NonStop host to the array be routed through separate FC

switches utilizing WWN zoning. See the HP StorageWorks SAN Design Reference

Guide at http://h18006.www1.hp.com/storage/saninfrastructure.html.

Installation