HP StorageWorks XP10000 - Disk Array System Configuration Manual - Page 22

Browse online or download pdf System Configuration Manual for Switch HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 35 pages. Cache lun xp
Also for HP StorageWorks XP10000 - Disk Array: Release Note (13 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), System Configuration Manual (49 pages), System Configuration Manual (43 pages), System Configuration Manual (42 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages), Configuration Manual (42 pages), User Manual (30 pages)

Print Page
HP StorageWorks XP10000 - Disk Array System Configuration Manual
Error Condition
The logical devices are not recognized by
the host.
Physical volumes cannot be created.
Logical volumes cannot be created.
The disk array responds "Not Ready" or the
disk array has displayed "Not Ready" and
timed out.
22
Troubleshooting
Recommended Action
Verify that the READY indicator lights on
the disk array are ON.Verify that fiber
cables are correctly installed and firmly
connected.Verify that the WWNs configured
in each host group match the WWNs for
the appropriate FCSA port. Do not install
two devices with the same ID on the same
bus.Verify that the disk array host mode is
set correctly for the NonStop host group on
the port.
Verify that the disk array logical devices are
correctly formatted.
Verify that the volume capacity for OPEN-x
volumes is not greater than the maximum
capacity allowed. See the
specifications
table.
Contact HP.
Emulation