HP StorageWorks XP10000 - Disk Array Configuration Manual - Page 15

Browse online or download pdf Configuration Manual for Switch HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 42 pages. Cache lun xp
Also for HP StorageWorks XP10000 - Disk Array: Release Note (13 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), System Configuration Manual (49 pages), System Configuration Manual (43 pages), System Configuration Manual (42 pages), System Configuration Manual (35 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages), User Manual (30 pages)

Print Page

Configuring the Fibre Channel ports

Configure the disk array Fibre Channel ports by using XP Remote Web Console. Select the settings

for each port based on your storage area network topology. Use switch zoning if you connect different

types of hosts to the array through the same switch.

In fabric environments, the port addresses are assigned automatically. In arbitrated loop environments,

set the port addresses by selecting a unique arbitrated loop physical address (AL-PA) or loop ID for

each port. For specific values, refer to the HP StorageWorks XP LUN Manager User's Guide applicable

to your array.

Set each array port to FABRIC ON or OFF with connections of POINT-TO-POINT or FC-AL as shown

in the following figures and table. For detailed topology information, refer to the HP StorageWorks

SAN design reference guide at

http://www.hp.com.

XP Disk Array Configuration Guide for VMware