HP StorageWorks XP12000 System Configuration Manual - Page 21

Browse online or download pdf System Configuration Manual for Switch HP StorageWorks XP12000. HP StorageWorks XP12000 49 pages. Cache lun xp
Also for HP StorageWorks XP12000: Release Note (13 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), System Configuration Manual (43 pages), System Configuration Manual (42 pages), System Configuration Manual (35 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages), Configuration Manual (42 pages), Configuration Manual (50 pages), User Manual (30 pages)

Print Page

Example

Record the device number for each new device on the worksheet in Appendix A,

Path

Worksheet. This information will be useful later during disk partitioning and

volume creation.

Verify that all new disk devices are listed.

Conﬁgure disk devices

Conﬁgure the disks in the disk array using the same procedure for conﬁguring any new

disk on the host. This includes the following procedures:

2. Assigning the new devices to volumes

3. Mounting the new volumes

4. Verifying client operations

Creating scripts to conﬁgure all devices at once may save you considerable time.

Creating the disk partitions

Before you create the disk partitions, consult the Novell documentation for conﬁrmation

about the type of partition that is available with your operating system version.

NetWare 5.x

At the server console enter LOAD INSTALL to load the Installation Option module.

On the Installation Option screen, click Standard disk options and press ENTER to

access the NetWare disk options.

On the Available Disk Options screen, select Modify disk partitions and Hot Fix

and press ENTER.

The Available Disk Drives screen lists the devices by device number. Record the

device numbers. On the Available Disk Drives screen, select the device to be

partitioned and press ENTER.

If the partition table has already been initialized, skip this step. If the partition table

has not yet been initialized, the partition table message is displayed. Press ENTER to

conﬁrm the message. When the "Initialize the partition table?" message appears,

select Yes and press ENTER to initialize the partition table.

HP StorageWorks Disk Array XP operating system conﬁguration guide Novell Netware

NetWare prompt>

1. 0x000B: [V6E0-A2-D7D:0] HP OPEN-3 rev:0111

2. 0x000C: [V6E0-A2-D7D:1] HP OPEN-3 rev:0111

LIST DEVICES