HP StorageWorks XP12000 Configuration Manual - Page 15

Browse online or download pdf Configuration Manual for Switch HP StorageWorks XP12000. HP StorageWorks XP12000 30 pages. Cache lun xp
Also for HP StorageWorks XP12000: Release Note (13 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), System Configuration Manual (49 pages), System Configuration Manual (43 pages), System Configuration Manual (42 pages), System Configuration Manual (35 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (42 pages), Configuration Manual (50 pages), User Manual (30 pages)

Print Page
HP StorageWorks XP12000 Configuration Manual

Fibre address

In fabric environments, the port addresses are assigned automatically. In arbitrated loop environments,
set the port addresses by selecting a unique arbitrated loop physical address (AL-PA) or loop ID for
each port. For specific values, refer to the HP StorageWorks XP LUN Manager User's Guide applicable
to your array.

Fabric and connection parameter settings

Set each array port to FABRIC ON or OFF with connections of POINT-TO-POINT or FC-AL as shown
in the following figures and table. HP recommends that the individual Fibre Channel paths from the
NonStop host to the array be routed through separate FC switches utilizing WWN zoning. See the
HP StorageWorks SAN Design Reference Guide at:
http://www.hp.com/go/sandesign.
Figure 2 Point-to-point fabric topology example
XP Disk Array Configuration Guide for NonStop
15