HP StorageWorks XP12000 User Manual - Page 10

Browse online or download pdf User Manual for Switch HP StorageWorks XP12000. HP StorageWorks XP12000 30 pages. Cache lun xp
Also for HP StorageWorks XP12000: Release Note (13 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), System Configuration Manual (49 pages), System Configuration Manual (43 pages), System Configuration Manual (42 pages), System Configuration Manual (35 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages), Configuration Manual (42 pages), Configuration Manual (50 pages)

Print Page
HP StorageWorks XP12000 User Manual

Unit of cache area allocation

A Cache LUN XP extent is a range of logical blocks within an LDEV. A logical block is 512 bytes.
For OPEN-V, a cache extent must have at least 128 Logical Block Addresses (LBAs), or 66 KB. For all other
supported open system emulation types, a cache extent must have at least 96 LBAs, or 49.5 KB. This is
known as a cache slot. A cache extent can have a maximum size of an entire LDEV, up to the limits of
Cache LUN XP cache memory. Allocate data to Cache LUN XP with a minimum size of 128 LBAs for
OPEN-V and 96 LBAs for other than OPEN-V.
For mainframe systems, a cache extent must be at least one cache slot or track (48 KB or 64 KB). Its
maximum size may be an entire LDEV, up to the limits of Cache LUN XP cache memory. Allocate data to
Cache LUN XP in units of cylinders and tracks.

Number of cache areas allowed

•
In DKC: 1,024
•
In LDEV: 1,024

Restrictions

Table 3
Restrictions
Configuration Restrictions
10
Cache LUN XP for the XP10000/XP12000
•
Do not exceed the capacity of the Cache LUN XP cache.
•
Do not configure an Auto LUN reserved volume for Cache LUN XP.
•
Do not place an LDEV in cache twice.
•
You cannot allocate Cache LUN XP cache space for an on-demand LDEV.
•
If you allocate Cache LUN XP on the Volume Management Area (VMA) volume
for LUN Security XP Extension, set 10,240 LBAs (5 MB or larger) for the
starting logical block address of the user data. To do this, add 10,240 LBAs to
the LBA value recognized on the host side.
•
To apply Cache LUN XP to a LUSE volume using Select All Area, you must
apply it to all the LDEVs that form the LUSE volume.
•
If you want to set Cache LUN XP for an LDEV within a LUSE volume using LBAs,
you must know the exact number of LBAs in each LDEV in the LUSE volume.
The number of LBAs listed in the Cache LUN XP panel is only for a single LDEV
and does not match the number of LBAs recognized by the host if the mounted
volume is a LUSE volume.
To identify the exact number of LBAs in an LDEV, display the Basic Information
Display pane, and determine the parity group to which the LDEV belongs.
Next, display the Customized Volume panel and find the exact number of LBAs
in the LDEV.
NOTE:
For more information about the Basic Information Display pane,
refer to the HP StorageWorks XP Remote Web Console user guide.
For more information about customized volumes, refer to the HP
StorageWorks LUN Configuration and Security Manager XP user guide.