HP XP20000/XP24000 Configuration Manual - Page 9

Browse online or download pdf Configuration Manual for Switch HP XP20000/XP24000. HP XP20000/XP24000 36 pages. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Also for HP XP20000/XP24000: Release Note (13 pages), Integration Manual (29 pages), Release Note (4 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Reference Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages)

Print Page

error-reporting operations requested by the SNMP manager. SNMP properties are usually set from

the SVP but they can also be set remotely using XP Remote Web Console or XP Command View

Advanced Edition Software. Refer to the applicable user's guide for procedures.

Figure 1 SNMP configuration

XP RAID Manager command devices

HP StorageWorks XP RAID Manager manages HP StorageWorks XP Business Copy Software or HP

StorageWorks XP Continuous Access Software operations from a host server. To use XP RAID Manager

with XP Business Copy Software or XP Continuous Access Software, you use XP Remote Web Console,

or XP Command View to designate at least one LDEV as a command device. Refer to the applicable

user's guide for information about how to designate a command device.

When creating a command device, HP recommends creating a LUN 0 device of 35 megabytes (the

smallest allowed). This will allow you to use host-based RAID management tools available from HP

and will also allow HP support to perform some additional diagnostics.

Note that storage assigned to the LUN 0 device is not accessible to OpenVMS.

Perform these actions to set up the disk array:

Installing and configuring the disk array

Setting the host mode for the disk array ports

Setting the System Option Modes

Configuring the Fibre Channel ports

Installing and configuring the host

Loading the operating system and software

Installing and configuring the FCAs

Clustering and fabric zoning

Fabric zoning and LUN security for multiple operating systems

Configuring FC switches

Connecting the disk array

Defining the paths

Verifying disk array device recognition

XP Disk Array Configuration Guide for OpenVMS