HP XP20000/XP24000 Configuration Manual - Page 10

Browse online or download pdf Configuration Manual for Switch HP XP20000/XP24000. HP XP20000/XP24000 36 pages. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Also for HP XP20000/XP24000: Release Note (13 pages), Integration Manual (29 pages), Release Note (4 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Release Note (5 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Reference Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages)

Print Page

Assembling hardware and installing software

Loading the microcode updates

Installing and formatting devices

After these tasks are finished, you will use XP Remote Web Console, XP Command View Advanced

Edition Software, or XP Array Manager to complete the remaining tasks listed below. If you do not

have these programs, your HP service representative can perform these tasks for you.

Setting the host mode and host group mode for the disk array ports

After the disk array is installed, you must set the host mode for each host group that is configured on

a disk array port to match the host OS. Set the host mode using LUN Manager in XP Remote Web

Console (shown) or XP Command View Advanced Edition Software. If these are not available, the

HP service representative can set the host mode using the SVP.

The available host mode settings are as follows:

Table 1 Host mode settings

Host mode

2C (available on some array mod-

els)

Table 2 Volume names for host mode setting

Volume on XP array (examples)

OPEN-E

OPEN-9

OPEN-9*2

OPEN-9*3-CVS

Installing and configuring Windows for the XP disk array

Description

HP recommended. (For use with LUSE volumes when online LUN

expansion is required or may be required in the future.)

HP recommended. (Use if future online LUN expansion is not

required or planned.)

Volume name as seen on host

host mode = 0C

OPEN-E

OPEN-9

OPEN-9*2

OPEN-9*3-CVS

host mode = 2C

OPEN-E

OPEN-9

OPEN-9-CVS