HP XP20000/XP24000 Configuration Manual - Page 30

Browse online or download pdf Configuration Manual for Switch HP XP20000/XP24000. HP XP20000/XP24000 36 pages. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Also for HP XP20000/XP24000: Release Note (13 pages), Integration Manual (29 pages), Release Note (4 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Release Note (5 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Reference Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages)

Print Page

HP Scalable NAS can use either one or three membership partitions, but to ensure that a membership

partition is always available, we strongly recommend that you use three membership partitions.

HP recommends that you create three LUNs for the membership partitions. Each LUN should be a

minimum of 1 GB in size.

Snapshots

Snapshots are not currently integrated into the HP Scalable NAS software for Windows.

When the LUNs have been presented to all nodes in the cluster, import them into the cluster using the

GUI or the mx command. After the disks are imported, and you have put a partition table on them as

described previously, you can then use them to create dynamic volumes and file systems, mount them

on the cluster nodes, and assign drive letters or junction points.

For details on importing and deporting disks, dynamic volume creation and configuration, and file

system creation and configuration, see the HP StorageWorks Scalable NAS File Serving Software

Administration Guide .

HP Cluster Gateway deployments