HP Xw460c - ProLiant - Blade Workstation Installation Manual - Page 11

Browse online or download pdf Installation Manual for Switch HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 pages. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Also for HP Xw460c - ProLiant - Blade Workstation: Implementation Manual (35 pages), Error Prevention Manual (12 pages), Technical White Paper (12 pages), Firmware Update (9 pages), Installation Manual (2 pages), Frequently Asked Questions Manual (14 pages), Setup Poster (9 pages), Management Manual (28 pages), Hardware Manual (23 pages), Overview (35 pages), User Manual (33 pages), Optimization Manual (13 pages), Limited Warranty (10 pages), Installation Instructions Manual (10 pages), Installation Instructions Manual (8 pages), Installation Instructions (4 pages), Installation Instructions (2 pages)

Print Page
HP Xw460c - ProLiant - Blade Workstation Installation Manual
2 HP Insight Software Central Management Server
requirements

Hardware requirements

The following table lists the Insight software CMS hardware installation requirements.
Table 2-1 Hardware requirements
Component
Specification
Server
HP ProLiant BladeSystem c-Class or p-Class server blades, or HP ProLiant ML or DL 300, 500, and 700 G3 or higher
recommended
Memory
At least 2 GB RAM (3 GB RAM recommended). If you are installing HP Insight Dynamics – VSE, 4 - 6 GB is
recommended.
Processor
At least 1.6 GHz (2 GHz or faster recommended)
Disk space
At least 15 GB for HP Insight software. More space is needed for storing deployment operating systems (for HP Insight
Rapid Deployment software) and patches (for Vulnerability and Patch Management Pack).
File
New Technology File System (NTFS)
structure
DVD drive
Local or mapped DVD drive required
1
Construction of a system meeting the minimum memory requirements for Virtual Server Environment (VSE) operation is problematic
on 32-bit versions of the Windows Server family due to the maximum addressable memory space of a 32-bit operating system of
4 GB. This memory space is also shared by some hardware elements, such as video memory, reducing the maximum available
memory below the minimum recommended by HP. To overcome this limitation, the /PAE switch can be added to the boot.ini file
to enable the Physical Address Extension feature. This allows access to memory above 4 GB on 32-bit operating system editions
running on hardware that supports PAE.
2
For HP Insight Dynamics – VSE, two or more processing cores are required.
3
For information about HP Insight Dynamics requirements, see the HP Insight Dynamics - VSE and HP VSE Management Software
Version 4.1 Support Matrix or HP Insight Dynamics - VSE & VSE Management Software Version 4.1 Getting Started Guide .

Software requirements

The following naming conventions are used in
Table 2-2 Operating system naming convention
Term
Windows Server 2008 (32-bit)
Windows Server 2008 (64-bit)
Windows Server 2003
Windows Server 2003 R2
1
ID – VSE, VCEM, IO, and HP IR do not support CMS installation to 64-bit Windows Server 2008. For more information, see the
component's support matrix.
The following abbreviations are used in the tables.
Table 2-3 Component Abbreviations
Abbreviation
HP II
HP IR
HP SIM
IPM
IO
1
Table 2-4 " HP Insight software CMS
Operating System
Microsoft Windows Server® 2008, Standard and Enterprise Edition 32-bit
Microsoft Windows Server 2008, Standard and Enterprise Edition 64-bit (32-bit mode)
Windows Server 2003, Standard and Enterprise Edition SP2 (32-bit)
Windows Server 2003 R2, Standard and Enterprise Edition SP2 (32-bit)
Component
HP Integrated Installer
HP Insight Recovery
HP Systems Insight Manager
HP Insight Power Manager
HP Insight Orchestration software
2
3
requirements".
1

Hardware requirements

1 1