HP Xw460c - ProLiant - Blade Workstation Management Manual - Page 12

Browse online or download pdf Management Manual for Switch HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 28 pages. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Also for HP Xw460c - ProLiant - Blade Workstation: Implementation Manual (35 pages), Error Prevention Manual (12 pages), Technical White Paper (12 pages), Firmware Update (9 pages), Installation Manual (2 pages), Frequently Asked Questions Manual (14 pages), Setup Poster (9 pages), Installation Manual (33 pages), Hardware Manual (23 pages), Overview (35 pages), User Manual (33 pages), Optimization Manual (13 pages), Limited Warranty (10 pages), Installation Instructions Manual (10 pages), Installation Instructions Manual (8 pages), Installation Instructions (4 pages), Installation Instructions (2 pages)

Print Page
HP Xw460c - ProLiant - Blade Workstation Management Manual

Onboard Administrator graphical user interface

The GUI provides remote administration capabilities from a desktop web-browser. The GUI allows
administrators to simplify tasks such as managing users and network settings, Virtual Power control,
boot order control, and enclosure DVD attachment to one or more blades. The GUI can also simplify
administrative tasks when identical operations are performed on multiple server blades.
The GUI contains graphical views for server-to-interconnect port mapping, zone cooling
measurements, and power use history. The GUI displays a graphical view of one or multiple
enclosures which shows the status for each device (Figure 11). At a glance, the administrator can tell
if any devices in the enclosure need attention. By logging in to a single enclosure, an administrator
gains access to all enclosures and blades on the link.
Figure 11. Onboard Administrator GUI – Device Bay Summary

Onboard Administrator command line interface

The Onboard Administrator's CLI (Figure 12) allows administrators to use serial, telnet, or SSH
connections to control the operation of the enclosure and its devices, including the use of scripts for
automation. CLI commands include commands to connect to the ILO 2 on each server blade and to
supported interconnect module management processors such as Virtual Connect. The Onboard
12