Aquathem 16104-08 Installation Manual - Page 2

Browse online or download pdf Installation Manual for Swimming Pool Heater Aquathem 16104-08. Aquathem 16104-08 12 pages. Swimming pool solar heating systems

Print Page
MOUNTING
COMPONENTS
DIAGRAM

MOUNTING COMPONENTS

This section provides descriptions and part numbers of the
Aquatherm Industries Installation Kits required for each
solar pool heating system. The mounting location of each
kit component is shown by the corresponding circled num-
ber in the 'Mounting Components' diagram, shown above.
1
The Collector Installation Kit (Part #12034-1 for 1 1/2" kit;
#12034-2 for 2" kit) contains the parts needed to fasten a single
solar collector to a supporting surface and to make water connec-
tions from one collector to another. Hold-down strap is not includ-
ed and must be ordered separately Use one (1) kit per collector.
Part No Qty 1 1/2" Qty 2"
Description
__
10008-1
1
Outlet header hold-down bracket assembly
10008-2 __
1
Outlet header hold-down bracket assembly
50006
2
2
Hold-down strap bracket
__
60648-1
2
Collector connector hose (3 3/4" long)
60648-2 __
2
Collector connector hose (3 3/4" long)
__
60546-1
4
Hose clamp, stainless steel
60546-2 __
4
Hose clamp, stainless steel
2
The System Kit (Part #12135-1 for 1 1/2" kit; #12135-2
for 2" kit) contains additional hold-down hardware, connec-
tion parts and adapters needed to complete water connec-
tions from the collectors to the system feed and return line.
The pipe adapters that connect the system piping to the col-
lectors are high temperature CPVC. The system check
valve is 1 1/2" - 2" PVC. Installation and homeowner man-
uals are also included. Use one (1) kit per system.
Part No Qty 1 1/2" Qty 2"
__
10003-1
1
10003-2 __
1
__
10008-1
1
10008-2 __
1
10011
4
4
__
30061-1
1
30061-2 __
1
__
30089-1
2
30089-2 __
2
50006
2
2
__
60649-1
2
60649-2 __
2
__
60546-1
4
60546-2 __
4
60019-2
1
1
19001
1
1
- - - - -
1
1
2
Description
Vacuum Relief Valve
Vacuum Relief Valve
Outlet header hold-down bracket assembly
Outlet header hold-down bracket assembly
Hold-down strap clamp assembly
End cap
End cap
Pipe adapter
Pipe adapter
Hold-down strap bracket
System connector hose (7" long)
System connector hose (7" long)
Hose clamp, stainless steel
Hose clamp, stainless steel
Check Valve (1 1/2" & 2")
Installation Manual
Owner's Manual