Diamond Products HDS60-8 Operator's Manual - Page 6
Browse online or download pdf Operator's Manual for Saw Diamond Products HDS60-8. Diamond Products HDS60-8 19 pages. Concrete saw
Print Page
Wear gloves and be alert to the
surrounding environment when handling
blades.
When installing the blade, always fit the
groove in the blade to the main drive wheel.
DO NOT exceed the blade's maximum
recommended speed when cutting.
Excessive blade speeds can cause blade
breakage, resulting in serious injuries and/or
death!
DO NOT use damaged blades when cutting
to avoid harming yourself, others, or the
saw.
Blade Guard Safety
DO NOT operate the saw with the blade
guard removed.
Always inspect the blade guard prior to
operating the saw.
Replace damaged components immediately.
DO NOT install or remove the blade guard
with the saw running.
Cutting Safety
The direct work area must be checked prior
to cutting for buried or imbedded electrical,
gas or water lines that could be damaged
and/or cause personal injury while cutting.
Turn off all electricity, gas, and water around
the direct work area prior to cutting.
DO NOT expose yourself or anyone else to
the direct line of the blade when operating
the saw.
DO NOT allow any person, animal, and/or
object in and around the work area while
cutting.