Diamond Products CSE12 Operator's Manual - Page 8
Browse online or download pdf Operator's Manual for Chainsaw Diamond Products CSE12. Diamond Products CSE12 20 pages. Electric chainsaw
Also for Diamond Products CSE12: Parts List & Operator’s Manual (20 pages)
Print Page
General Safety
•
Read and understand all safety,
operations, and maintenance instructions
provided in this manual prior to operating or
servicing the saw.
•
Keep equipment components clean and
free of slurry, concrete dust, and debris.
•
Inspect water hoses prior to operating the
equipment. Clean, repair, or replace
damaged components.
•
Raise the equipment to a proper height for
access when working underneath the
equipment. Use chocks to block the
wheels, and fit blocks or jacks under the
frame edges.
•
When using a jack to raise the equipment,
place the jack against a solid, flat area
under the frame base to properly support
the equipment.
•
Repair the equipment immediately when a
problem arises.
•
Replace equipment decals if unreadable.
•
Dispose of all hazardous waste materials
according to city, state, and federal
regulations.
•
Always have a phone nearby, and locate
the nearest fire extinguisher and first aid kit
prior to operating the equipment.
•
Operate the equipment wearing flame
resistant clothing.
•
Always wear safety glasses when removing
retaining rings.
•
Persons under the statutory age limit
should not operate the equipment.
•
Keep all body parts away from rotating
machinery.
•
Replace all guards and access panels
(unless stated otherwise) prior to operating
the equipment.
•
Chock the wheels to help prevent
unnecessary movement.
DO NOT:
•
Drop equipment, supplies, tools, etc., when
handling to help prevent injuries.
•
Lift and carry equipment, supplies, tools,
etc., that are too heavy and/or cannot be
lifted easily.
•
Operate the equipment without using the
appropriate safety equipment required for
the work task.
8
EQUIPMENT DESIGNATION OPERATOR'S MANUAL
•
Operate or service the equipment with any
clothing, hair, or accessories that can snag
in the machinery, which could lead to
serious injuries or death!
•
Operate the equipment using attachments
not associated with or recommended for
the equipment.
•
Operate the equipment around combustible
materials or fumes to prevent
fires/explosions.
•
Operate the equipment with anyone near
the work area or within the direct line of the
blade.
•
Operate the equipment until all
unnecessary materials have been removed
from the work area.
•
Operate the equipment with loose nuts,
screws, and bolts.
•
Operate the equipment when ill or fatigued.
•
Operate the equipment under the influence
of drugs and/or alcohol.
•
Operate the equipment on steep slopes.
•
Cut concrete with guards and access
panels removed.
•
Grease the equipment with the engine
running.
•
Touch hot components when operating the
equipment.
•
Leave the equipment unattended until the
engine is off and the blade has stopped
spinning.
•
Place the equipment into storage until it
has cooled down.
•
Service the equipment until it has cooled
down.
•
Service the equipment with the engine
running.