Panasonic et-jpf100we Operating Instructions Manual - Page 10

Browse online or download pdf Operating Instructions Manual for Projector Panasonic et-jpf100we. Panasonic et-jpf100we 16 pages.

Print Page

Mounting procedure (continued)

Connecting the power cord to the projector

This section describes connecting the supplied power cord to the projector.

To prevent disconnection of the power cord, use the supplied power cord and ﬁ rmly insert the connector

all the way into the <AC IN> socket of the projector and then secure it in place.

For details on the handling of the power cord, refer to "Read this ﬁ rst!" ( 2 page).

■ Power cord connection procedure

Power supply unit

10 - ENGLISH

Connector

<AC IN> socket

Connector secure

lock

Rib

Connector

Guides

1) Check the shapes of the <AC IN> socket of the

projector and the connector of the power cord

and then orient the connector correctly and

insert it ﬁ rmly.

2) Attach the connector secure lock.

 Attach the connector secure lock supplied with

the projector by sliding it along the guides on

both sides of the <AC IN> socket of the power

supply unit.

When attaching it, make sure that the connector

of the power cord ﬁ ts further inside (power

supply unit) than the ribs on the connector

secure lock.

Connector

secure lock