Panasonic PLC-XP40 Owner's Manual - Page 24

Browse online or download pdf Owner's Manual for Projector Panasonic PLC-XP40. Panasonic PLC-XP40 44 pages. Multimedia projector

Print Page

COMPUTER INPUT

This projector can automatically tune to display signals from most personal computers currently distributed. However, some

computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system

of this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickering

picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special

signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This

enables you to recall setting for a specific computer whenever you use it.

Note : This PC ADJUST Menu cannot be operated when in digital signal input on DVI terminal and "RGB" is selected on PC

SYSTEM MENU (P23).

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

ADJUST Menu icon.

Press POINT DOWN button to move a red frame pointer to item

that you want to adjust and then press SELECT button.

Adjustment dialog box will appear. Press POINT LEFT/RIGHT

button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from display.

Press POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

Number of total dots in one horizontal period. Press POINT

LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press POINT LEFT/RIGHT

button(s) to adjust position.

Vertical

Adjusts vertical picture position. Press POINT LEFT/RIGHT

button(s) to adjust position.

Current mode

Press SELECT button to show information of computer selected.

Clamp

Adjusts clamp position. When image has a dark bar(s), try this

adjustment.

MANUAL PC ADJUSTMENT

PC ADJUST MENU

Move a red frame icon to item and press

SELECT button.

Selected Mode

Press POINT LEFT/RIGHT

button to adjust value.

Press SELECT button at this icon to

adjust "Clamp," "Display area (H/V)" or

set "Full screen."

Current mode

Press SELECT button at

Current mode icon to show

information of computer

connected.

PC ADJUST Menu icon

Shows status

(Stored / Free) of

selected Mode.