Panasonic PT-51SX30 Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Projector Panasonic PT-51SX30. Panasonic PT-51SX30 25 pages. Color video projection system

Print Page
INS TA LLA TION
Installation
Television Location
This unit can be used as an entertainment center.
Consult your dealer for available options.
(3
Avoid excessive sunlight or bright lights, including reflections.
£1
Keep away from excessive
heat or moisture.
Inadequate ventilation may cause internal
component failure.
_3
Fluorescent lighting may reduce remote control transmitting range.
O
Keep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components.
For best results:
£1
Use 75-ohm coaxial shielded cables.
£1
Use appropriate
input and output connectors, that match your component connectors.
{3
Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
_MIDESLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Potad7_ed p lug
Non-Polarized
plug
Cable / Antenna
For proper reception,
either a cable or antenna
connection
is
required.
Cable Connection
Incoming Cable from
Connect
the cable supplied
by your local cable company.
Note:
A cable converter
box may be required
for proper reception.
Check
with
your
local
cable
company
for
compatibility
requirements.
Antenna Connections
Cable Company
75 Ohm VHF/UHF
on back of P'FV
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception an outdoor antenna is recommended.
Connect
home antenna to ANT1 connection
on back of
Incoming
Cable from
Home Antenna
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
_
Cable
Preset
Cable Mode is preset at the factory,
Antennausers mustchangeto TV Mode and
ANT 1 in the Set Up menu.
im