Panasonic PT-51SX60 Operating Instructions Manual - Page 5
Browse online or download pdf Operating Instructions Manual for Projector Panasonic PT-51SX60. Panasonic PT-51SX60 24 pages. Color video projection system
Also for Panasonic PT-51SX60: Operating Instructions Manual (48 pages)
Print Page
Installation
INSTALLATION
Television Location
This unit can be used as an entertainment center. Consult your dealer for available options.
[3
Avoid excessive sunlight or bright lights, including reflections.
[_
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
O
Fluorescent lighting may reduce remote control transmitting range.
O
Keep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
O
Use 75-ohm coaxial shielded cables.
_1
Use appropriate input and output connectors, that match your component connectors.
O
Avoid long cables to minimize interference.
AC Power Supply
Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE BLADE
CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
FOR SOME MODELS THAT ARE
NON-POLARIZED,
THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Polarized plug
Cable / Antenna 1 and 2
For proper
reception,
either a cable or antenna
connection
is required.
Cable
Connection
Incoming Cable from
Connect
the cable supplied
by your local cable company.
Note:
A cable converter box may be required for proper reception.
Check
with your
local
cable
company
for compatibility
requirements.
Antenna
1 and 2 Connections
Cable Company
2!,
75 Ohm VHF/UHF
on back of TV
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception an outdoor antenna is recommended.
To use Antenna 1 or Antenna 2, select ANT1 OR ANT2 and
"IV Mode in the SET UP menu under Prog Chan (Program
Channels).
Cable
Mode
is preset
at the
Antenna users must change to TV Mode in
the Set Up menu.
Incoming
Cable from
Home Antenna
[]