Panasonic PT-AE1000E Remote Control Operating Manual - Page 14
Browse online or download pdf Remote Control Operating Manual for Projector Panasonic PT-AE1000E. Panasonic PT-AE1000E 16 pages. Panasonic lcd projector operating instructions
Also for Panasonic PT-AE1000E: Operating Instructions Manual (28 pages)
Print Page
Editing displays on the LCD
When remote control signals for a home theatre
system device have been learnt for the USER 1-3
function buttons, you can change the "-A-, -B-, -
C-" displays on the LCD to your preferred
displays.
List of characters that can be displayed
List of characters that can be displayed
Upper-case letters: A-Z
Symbols: -, +, _, Q, ?, space
1
Press "DEVICE", use the tilt button to
select the device, and then press "ENTER"
2
Press "LEARN" for 3 seconds or more.
3
3 Press the top or bottom of the tilt button
to select "KEY EDIT?" and then press
If "ERROR" is displayed
If no signals have been learned,
"ERROR" will be displayed.
4
Press the function button to be changed.
Press the left or right sides of the tilt button
5
to move to the character to be changed,
and press the top or bottom of the tilt
button to select the character.
:Display position
:Character select
During setting, the space character will
be displayed as "
".
To edit another character display, repeat
steps 4 and 5.
14 - E
NGLISH
Numerals: 0-9
(Example: When "DVD"is selected)
(Example: When function B is selected)
6
Press "ENTER".
To finish, press "SETUP".
Editing the device selection display
You can remove the indicators for system
devices that are not being used, to reduce the
number of button operations required when
selecting system devices.
1
Press "SETUP" for 3 seconds or more.
2
Use the tilt button to select "PJ", and then
press "ENTER".
3
Use the tilt button to select "SRC EDIT?",
and then press "ENTER".
4
Use the tilt button to select the display to
be deleted, and then press "DEVICE".
When "DEVICE" is pressed, the indicator will flash more
slowly.
To delete more than one indicator, repeat step 4.
5
Press "ENTER" and then press "SETUP".
Restoring indicators that have been deleted.
In step 4 above, use the tilt button to select the indicator that you
would like to display again, and then press "DEVICE".