Panasonic PT-AE4000E Operating Instructions Manual - Page 18
Browse online or download pdf Operating Instructions Manual for Projector Panasonic PT-AE4000E. Panasonic PT-AE4000E 36 pages. Full high-definition home cinema projector
Also for Panasonic PT-AE4000E: Functional Instructions (50 pages), Brochure & Specs (6 pages), Functional Instructions (50 pages)
Print Page
Projecting an image
Selecting the input signal
1.
Switch on the connected devices.
Press the play button of the required device.
2.
Press the
INPUT SELECT button to select the
required input method if needed. See "Switching
the input signal" of the functional instructions that
is in the provided CD-ROM.
The image will be projected on the screen.
Positioning the image
1.
Adjust the projected image with the lens shift dials.
See "Lens shift and positioning" on page 15.
2.
Adjust the angle of the projector.
You can screw the front leg adjusters up/down to
control the angle of the projector for adjusting the
throwing angle.
Screw up the front leg adjusters, and an audible click
will be heard as the limit.
E
18 -
NGLISH
NOTE:
•
AUTO SEARCH
is ON as default and the signal from
the connected devices is detected automatically.
See "AUTO SEARCH" in "OPTION menu" of the
functional instructions that is in the provided CD-ROM.
3.
Adjust the focus and the projected image size.
Press +/− of the FOCUS and ZOOM buttons to
adjust.
Press the LENS button to adjust the focus and zoom
by the remote control. See "LENS CONTROL" of
the functional instructions that is in the provided CD-
ROM.
NOTE:
•
Do not touch the air exhaust port as this may cause
burns or injury.
•
If keystone distortion occurs, see "KEYSTONE" in
"POSITION menu" of the functional instructions that is
in the provided CD-ROM.
•
If you adjust the focus, you may need to adjust the size
of the image by pressing the ZOOM button again.