Panasonic PT-AE4000E Functional Instructions - Page 10
Browse online or download pdf Functional Instructions for Projector Panasonic PT-AE4000E. Panasonic PT-AE4000E 50 pages. Full high-definition home cinema projector
Also for Panasonic PT-AE4000E: Operating Instructions Manual (36 pages), Brochure & Specs (6 pages), Functional Instructions (50 pages)
Print Page
Switching the projector on/off
Power indicator
Power indicator informs you of the status of the power.
When the TEMP indicator is flashing, the power
indicator will turn red, and you cannot switch on the
power.
Indicator status
No illumination or flashing
Red
Green
Orange
NOTE:
•
See "TEMP indicator" in "TEMP and LAMP Indicators" of the operating instructions.
•
While the projector is cooling the lamp, do not switch
•
The electric consumption in standby mode is 0.08 W.
E
10 -
NGLISH
MAIN POWER is switched off.
Lit
MAIN POWER is switched on and the projector is in standby mode.
MAIN POWER is switched on (standby mode) and the POWER ON LINK is set to
ON.
Flashing
•
The power consumption is not much different when it is lit.
(See "VIERA Link Connection" on page 45)
Flashing
The power button is switched on and the projector is getting ready to project.
Lit
Projecting.
Lit
The power button is switched off and the projector is cooling the lamp.
The power button is switched on again when cooling the lamp and recovering to
Flashing
projection mode. Recovery may take a while.
Power indicator
Status
MAIN POWER off or unplug the mains lead.