Panasonic PT-AE4000E Functional Instructions - Page 27
Browse online or download pdf Functional Instructions for Projector Panasonic PT-AE4000E. Panasonic PT-AE4000E 50 pages. Full high-definition home cinema projector
Also for Panasonic PT-AE4000E: Operating Instructions Manual (36 pages), Brochure & Specs (6 pages), Functional Instructions (50 pages)
Print Page
J COLOUR MANAGEMENT
You can adjust a selected colour individually
by using CURSOR or adjust the six colour
components (Red, Green, Blue, Cyan, Magenta,
Yellow) by using RGBCMY.
To open the COLOUR MANAGEMENT menu,
select from the ADVANCED MENU in the
PICTURE menu, or press the FUNCTION button
as a shortcut.
In the factory default setting, COLOUR
MANAGEMENT is set as a default for the FUNCTION
button.
COLOUR MANAGEMENT
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
PROFILE SAVE
SELECT
PROFILE DELETE
PROFILE NAME CHANGE
RETURN
Create a new profile
Q
Adjusting the selected colour with the
CURSOR mode.
Select a colour and adjust COLOUR, TINT and
BRIGHTNESS.
1.
Press ◄ ►
to select CURSOR in ADJUSTMENT
MODE.
2.
Press ▲ ▼ to select
press the ENTER button.
The projected image is captured, and the target
cursor is displayed.
When the LOG is fully stored, the target cursor will
not be displayed.
Target cursor
3.
Move the cursor with ▲ ▼ ◄ ► to the required
place to select a colour and press the ENTER
button.
The colour at the centre of the target cursor is sampled
and the sample box is displayed in the left of the cursor.
The menu items are displayed on the screen.
You may fail to adjust when the very edge point of
the projection area is selected as sample.
You can create a profile only when ADJUSTMENT
MODE is set to either CURSOR or RGBCMY.
CURSOR
DEFAULT
ENTER
SELECT
RETURN
Sampled colour
NORMAL
CURSOR
START ADJUSTMENT and
COLOUR
0
-
+
TINT
0
-
+
-
BRIGHTNESS
0
+
4.
Press ▲ ▼ to select a menu item and the ◄ ► to
adjust each item level.
The result box is displayed on the right of the cursor
and shows the adjusted colour.
CURSOR
DEFAULT
COLOUR
ENTER
SELECT
TINT
BRIGHTNESS
RETURN
Adjust the vividness of the colour.
COLOUR
Setting range: −30 to +30
Adjust the colour tone.
TINT
Setting range: −30 to +30
Adjust the brightness of the colour.
BRIGHTNESS
Setting range: −20 to +20
5.
Press the
ENTER button to store the adjusted
result.
" PROCESSING" is displayed for a few seconds and
the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
6.
Press the
MENU or RETURN button to return to
the previous menu.
Repeat the steps above to store more adjustment.
When the LOG is fully stored, the screen will
be switched automatically to the COLOUR
MANAGEMENT menu.
Adjusting the selected colour with the
RGBCMY mode.
Select the colour from 6 different colour types
(RED, GREEN, BLUE, CYAN, MAGENTA,
YELLOW) and adjust COLOUR,TINT and
BRIGHTNESS.
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
1.
Press ◄ ► to select
MODE.
2.
Press ▲ ▼
to select START ADJUSTMENT and
press the ENTER button.
PICTURE menu
-
+10
+
-
+10
+
+10
-
+
Adjusted colour
NORMAL
RGBCMY
RGBCMY in ADJUSTMENT
E
NGLISH - 27