Panasonic PT-AE4000E Functional Instructions - Page 26
Browse online or download pdf Functional Instructions for Projector Panasonic PT-AE4000E. Panasonic PT-AE4000E 50 pages. Full high-definition home cinema projector
Also for Panasonic PT-AE4000E: Operating Instructions Manual (36 pages), Functional Instructions (50 pages), Brochure & Specs (6 pages)
Print Page
PICTURE menu
4.
Initialize the
GAMMA settings in the ADVANCED
mode.
1)
Press ▲ ▼ to select
ADJUSTMENT menu, and press the ENTER button.
GAMMA ADJUSTMENT
ENTER
SELECT
RETURN
2)
The confirmation screen will be displayed for the
GAMMA initialization.
GAMMA ADJUSTMENT
INITIALIZE GAMMA ADJUSTMENT.
OK
3)
Press ◄ ► to select
button.
Your GAMMA settings in the ADVANCED mode will
go back to the factory default setting.
NOTE:
•
It is not available to initialize in the
Setting the GAMMA with the SIMPLE
Q
mode
1.
In the
GAMMA ADJUSTMENT menu, press ◄ ►
to select SIMPLE in ADJUSTMENT MODE.
GAMMA ADJUSTMENT
2.
You can adjust linear intensity at 3 levels (high,
mid, low).
Press ▲ ▼ to select your required GAMMA
levels.
Levels
GAMMA HIGH
GAMMA MID
GAMMA LOW
Setting range: −8 to +8
Press ◄ ► to increase/decrease 1 point.
GAMMA HIGH
GAMMA MID
GAMMA LOW
E
26 -
NGLISH
INITIALIZE in the GAMMA
ADJUSTMENT MODE
ADVANCED
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
5
Y ADJUST
R ADJUST
G ADJUST
B ADJUST
INITIALIZE
CANCEL
OK and press the ENTER
SIMPLE mode.
ADJUSTMENT MODE
SIMPLE
GAMMA HIGH
0
GAMMA MID
0
GAMMA LOW
0
POINT
Y ADJUST
R ADJUST
G ADJUST
Default setting
0
0
0
-
0
+
0
-
+
-
0
+
J CONTRAST
You can adjust the amount of contrast of individual
RGB colours. Press ◄ ► to increase/decrease
1 point.
RGB
CONTRAST R
CONTRAST G
CONTRAST B
Setting range: −32 to +32
J BRIGHTNESS
You can adjust the brightness of individual RGB
colours. Press ◄ ► to increase/decrease 1 point.
RGB
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
Setting range: −16 to +16
J NR (Noise Reduction)
You can adjust the automatic noise reduction
system level. Press ◄ ► to change the level.
Setting range: 0 to +3
J MPEG NR
You can adjust the automatic noise reduction
system level for MPEG format images. The
system minimise block noise and mosquito noise
to eliminate jagged edges, and provides an overall
smoother image. Press ◄ ► to change the level.
Setting range: 0 to +3
NOTE:
•
MPEG NR
system is not available with COMPUTER/
HDMI (VGA60) signals.
J FRAME CREATION
You can activate the rendering system for fast
motion frames with fewer afterimage. Press ◄ ►
to select the required option.
OFF
Deactivate
MODE1
Setting for a cinema image
MODE2
Setting for a moving image
MODE3
Setting for a fast moving image
NOTE:
•
With some of the images, it might be difficult to see a
difference in result.
•
The image might look delayed with the
MODE3 setting. When the result does not meet your
requirement, select MODE1 or deactivate the system.
Default setting
0
0
0
Default setting
0
0
0
MODE2/