Panasonic PT-AE500 Operating Instructions Manual - Page 11

Browse online or download pdf Operating Instructions Manual for Projector Panasonic PT-AE500. Panasonic PT-AE500 30 pages.

Print Page

Connecting to computer

Equipment such as

an electric screen

Computer

To DVI-D

output

NOTE:

B Shut down the computer before turning off the MAIN POWER switch of

the projector.

20E

NGLISH

Computer

To RGB

output

# Open the cover.

$ Insert the batteries so that the

polarities are correct, and then close the

cover.

AAA batteries

(two)

NOTE:

B Do not drop the remote control unit.

B Keep the remote control unit away from liquids.

B Remove the batteries if not using the remote control unit for long periods.

B Do not use rechargeable batteries.

Operating range

If the remote control unit is held so that it is facing directly in front of the

remote control signal receptors on the front or rear of the projector, the

operating range is within approximately 7 m (23´) from the surfaces of the

receptors. Furthermore, the remote control unit can be operated from an

angle of ±30° to the left or right and ±15° above or below the receptors.

NOTE:

B If there are any obstacles in between the remote control unit and the

receptors, the remote control unit may not operate correctly.

B If strong light is allowed to shine onto the remote control signal receptor,

correct projector operation may not be possible. Place the projector as

far away from light sources as possible.

B If facing the remote control unit toward the screen to operate the projector,

the operating range of the remote control unit will be limited by the amount

of light reflection loss caused by the characteristics of the screen used.

-21

NGLISH