Panasonic PT-AT5000E Specifications - Page 5

Browse online or download pdf Specifications for Projector Panasonic PT-AT5000E. Panasonic PT-AT5000E 6 pages. Full hd 3d home cinema projector

Print Page

Detail Clarity Processor 3 Gives Natural Clarity to

Even the Finest Details

This digital image processing circuit brings greater clarity and sharp-

ness to details embedded in the image. After analysing the video signal

frequency in each scene, the circuit optimises the sharpness of each

part of the image based on the extracted information. The resulting

images, 3D or 2D, have more natural, lifelike expression than those of

previous image-processing methods.

Conventional sharpness control:

Sharpness is applied uniformly, which

can cause a halo or ring effect.

3D Viewing Monitor for Adjustment of Depth-of-Field

The projection size for

viewing 3D images can be

selected from among 9 dif-

ferent sizes, ranging from

40 inches to 200 inches

diagonally.*

The amount

of parallax is optimised

according to the projection

size, so comfortable, easy-

to-view 3D images can be enjoyed at any size. Furthermore, the 3D

Viewing Monitor makes sure the ﬁeld of depth is within the comfortable

zone by a graphical representation and make adjustments accordingly.

Abundant Connection Terminals

• HDMI™ with x.v.Colour™ and Deep Colour

The PT-AT5000E has three HDMI input terminals for digital trans-

mission without image degradation. The HDMI input terminals also

support Deep Colour and the x.v.Colour colour space. Deep Colour

provides 10-bit (over 1.07 billion) and 12-bit (over 68.7 billion) colour

depths for smooth gradation between colours, while x.v.Colour com-

pliance reproduces natural, lifelike images.*

• Programmable 12V Trigger for Automated Theatre Setup

Two 12V triggers are provided. *

set independently (menu selectable), they can link ﬂexibly with pow-

ered screens, room light

and powered curtains.

When combined with the

Intelligent Lens Memory,

they let you create a truly

classy home theatre.

VIERA Link for Easy Operation

The PT-AT5000E supports VIERA Link. If your home theatre

system contains VIERA Link-ready equipment, projection

can be started by using only the remote control unit of the

PT-AT5000E, regardless of whether the source is a Blu-ray Disc or a

TV program stored on an HD recorder. This eliminates the need for

hassling with several remote controls.*

* 4 Projection size for 2D images covers from 40 inches to 300 inches diagonally. * 5 The indicated distance between the projector and screen is valid when the conditions

described below are satisﬁed. Also, note that the transmission distance can differ largely due to strong light, such as sunlight and ﬂuorescent lamps, at the installation

location or due to the screen type or material. C

2: The screen is 100 inches, measured diagonally, and has a screen gain of 1. C

ONDITION

4: The [3D IR TRANSMITTER] setting in the main unit is set to [STRONG]. * 6 Effective in Rec. 709 image mode. * 7 The trigger terminals also operate as

not used. C

ONDITION

the 3D shutter outputs to connect the optional 3D IR transmitter ET-TRM110. * 8 Cannot be used simultaneously with TV that supports VIERA Link. Some operations may not

be available depending on the equipment. In this case, use its own remote control to operate the equipment. * 9 When a lamp power is set to ECO. The lamp replacement

cycle is up to 4,000 hours when the lamp mode is set to NORMAL. The values above are maximum values when they are used in cycles of being turned on for 2 hours and off

for 0.25 hours. When the lamps are turned on and off more frequently, the lamp replacement cycle is shortened. The usage environment affects the lamp replacement cycle.

Detail Clarity Processor 3: Signal

frequency is extracted realtime and

necessary sharpness is applied at varying

degrees for natural, lifelike images.

Since the input and output can be

1: The distance between the screen and the 3D Eyewear (viewing position) is 5 metres to the front of the screen.

ONDITION

3D Picture Balance with Waveform Monitor

The projector is able to

show the right and left

image side by side to

check if the two sides have

the same colours. The dif-

ference may occur due to

poor content quality. With

the Waveform Monitor dis-

played, you can adjust the

contrast, brightness, colour and tint as desired, and up to three adjust-

ment settings can be stored in memory for instant recall.

2D-3D Conversion

2D to 3D image conversion is possible, with ﬁve 3D effect modes to

select from.

Precisely Tuned 3D Projection with Optional Panasonic

VIERA 3D Eyewear

The PT-AT5000E uses frame sequential technology for 3D image pro-

jection. When viewing 3D content, signals from the PT-AT5000E's built-

in infrared transmitter precisely control the left and right shutters of

the active 3D eyewear, which can be shared with VIERA 3D TVs.

Built-in 3D Infrared Transmitter

The PT-AT5000E comes equipped with a built-

in transmitter with maximum transmission

distance of six metres (about 20 feet). *

more range up to ten metres (about 33 feet),

an optional infrared transmitter, ET-TRM110 is

available for greater installation ﬂexibility.

Up to 5,000-Hour Lamp Replacement Cycle

Simple Maintenance

Panasonic's proprietary lamp drive system helps maintain lamp per-

formance, resulting in a up to 5,000-hour lamp replacement cycle. For

easy maintenance, you can replace the ﬁlter from the side and the

lamp from the top of the projector. The dust ﬁlter and lamp are easily

replaced even after the PT-AT5000E is installed on the ceiling.

Ecology-conscious Design

Panasonic works from every angle to minimize environmental impact in the

product design, production and delivery processes, and in the performance of

the product during its life cycle. The PT-AT5000E reflects the following eco-

logical considerations.

•

No halogenated flame retardants are used in the cabinet.

•

Lead-free glass for the lens.

•

Standby power consumption of only 0.08 W has been achieved.

•

A sleep-timer that reduces wasteful power consumption.

•

RoHS compliant.

3: The projector is set up in front of the screen, and the lens shift function is

ONDITION

PT-AT5000E Full HD 3D Home Cinema Projector

For

Built-in 3D infrared

transmitter

and