Diamond Tech Power Max II Operation Manual - Page 2

Browse online or download pdf Operation Manual for Grinder Diamond Tech Power Max II. Diamond Tech Power Max II 6 pages. Diamond tech power max ii glass grinder operations manual

Print Page

Diamond Tech Power Max II Operation Manual

Before You Begin

Read and follow all instructions carefully.

• After unpacking all components, assemble grinder on a ﬁrm level surface to prevent grinder

from tilting and rocking.

• Be sure the power switch is in the OFF position before plugging in the grinder.

• Always disconnect grinder from electrical outlet before setting up or servicing.

• Wear proper apparel. Never wear loose ﬁtting clothes, neckties, jewelry and gloves that may

get caught in moving parts.

• Always wear safety goggles. Everyday eyeglasses have only impact resistant lenses they

are not safety glasses.

• Never turn on grinder while glass or working materials are touching the bits or disks.

• Keep out of reach of children.

• Never leave grinder running unattended. Turn power OFF when not in use.

• Do not operate while under the inﬂuence of medication or alcohol.

• To ensure top performance keep grinder properly maintained and lubricated.

Contents

Your Power Max II Grinder

and parts from the packaging.

1) Grinder Body

2) Two Work Surface Adaptors

3) 1/4" Chrome Hardened Bit

4) 1" Chrome Hardened Bit

5) Advanced Super Sponge

6) Easy Glide

Work Surface

™

7) Hex Wrench

8) Anti-Seize Lubricant

9) Rubber Stopper

Deluxe Model Also Includes:

1) Universal Face Shield

2) Easy-On

Foot Switch

™

3) 3/4" Chrome Hardened Bit

Assembly Instructions

A. Bit Installation

1) Before installing the grinder bit, lubricate the top of the motor

shaft and inside the bit by applying a thin coating of anti-seize

lubricant.

2) Slide the bit onto the motor shaft, positioning the set screw over

the ﬂat side of the motor shaft (Fig. 1). Position the bit on the

shaft so at least 1/8" of the diamond surface is exposed above

the Easy Glide

™

- PAGE 2

has been shipped partially assembled. Carefully remove grinder

™

Work Surface.

Fig.1