Panasonic PT-D10000 Series Specifications - Page 9

Browse online or download pdf Specifications for Projector Panasonic PT-D10000 Series. Panasonic PT-D10000 Series 12 pages. 3-chip dlp projector
Also for Panasonic PT-D10000 Series: Specification Sheet (10 pages), Specification Sheet (10 pages), Dimensions (1 pages), Dimensions (1 pages), Adjustment Manual (17 pages), Limited Warranty (1 pages), Specifications (6 pages), Setup And Operation Manual (37 pages), Specifications (12 pages)

Print Page
Panasonic PT-D10000 Series Specifications
Transmission from the computer
(Used Only for PT-D10000/DW10000)
Transmission from the computer begins with STX, then the ID, command, and ETX are sent in this order.
STX
Start
0x02
When self-diagnosis result operation in the PT-D10000/DW10000, read commands of C1 and C2 command is necessary.
A command is binary 4 byte command.
ID:
ID ALL=0x00, ID1=0x01, ID2=0x02, ID3=0x03, ID4=0x04, ... ,ID63=0x3f, ID64=0x40
Projector default setting is ID ALL.
Responses from the projector
(Used Only for PT-D10000/DW10000)
STX
Start
0x02
0x00 ~ 0x40
Responses are binary 21 byte command.
Self-diagnosis results are 16 byte (128bit) command.
ID
C1
ID
Command
0x00 ~ 0x40
0xfe
ID
C1
ID
Command
Command
0xfe
C2
ETX
Command
End
0xfe
0x03
C2
P1
P2
bit127
Self-diagnosis information 16 bytes
0xfe
9
P3
P14
P15
(128 bits)
P16
ETX
bit0
End
0x03